Flow-Induced Crystallization of Polyamide-6
نویسندگان
چکیده
منابع مشابه
Melting and crystallization of poly(vinylidene fluoride) blended with polyamide 6
Melting and crystallization of poly(vinylidene fluoride) (PVDF) blended with polyamide 6 (PA6) has been studied by differential scanning calorimetry. The melting of PVDF and PA6 is observed over a small temperature range, i.e. 174 to 181°C and 220 to 230°C, respectively, over the whole blend composition. This observation indicates that PVDF and PA6 are immiscible and do not co-crystallize, alth...
متن کاملCrystallization and dissolution of flow-induced precursors.
We make use of a specially synthesized linear high density polyethylene with a bimodal molecular weight distribution (MWD) to demonstrate that it is possible to produce a suspension of extended-chain (shish) crystals only. Such a suspension can be generated at high temperatures, above but close to the equilibrium melting temperature of the unconstrained extended-chain crystals (T(m)(0)=141.2 de...
متن کاملExtensional-flow-induced crystallization of isotactic polypropylene
A filament stretching extensional rheometer with a custom-built oven was used to investigate the effect of uniaxial flow on the crystallization of polypropylene. Prior to stretching, samples were heated to a temperature well above the melt temperature to erase their thermal and mechanical histories and the Janeschitz-Kriegl protocol was applied. The samples were stretched at extension rates in ...
متن کاملFlow-induced crystallization studied in the RheoDSC
Flow-induced crystallization is investigated through short-term shear flow experiments on poly(1butene) in the RheoDSC device. We demonstrate that the DSC signal shows contributions from spherulitic morphology in the center of the sample and oriented structures at the edge of the sample, the latter being induced by edge effects at the free surface. It is shown that, although small in terms of v...
متن کاملExpandable graphite/polyamide-6 nanocomposites
Polyamide-6 (PA-6)/graphite nanocomposites were prepared by melt blending, using a variety of graphites, including virgin graphite, expandable graphites and expanded graphite. The resulting nanocomposites were characterized by X-ray diffraction, thermogravimetric analysis, cone calorimetry, and tensile mechanical analysis. Nanocomposite formation does occur, as denoted by the nanometre dispersi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Polymer Processing
سال: 2018
ISSN: 2195-8602,0930-777X
DOI: 10.3139/217.3524