Flow in Annular Diffuser : 1st Report, Internal Flow and Performance

Numerical Studies of Flow through Annular Curved Diffuser

In the present investigation the distribution of mean velocity, static pressure and total pressure are experimentally studied on an annular curved diffuser of 37.5° angle of turn with an area ratio of 1.284 and centerline length was chosen as three times of inlet diameter. The experimental results then were numerically validated with the help of Fluent and then a series of parametric investigat...

Internal Annular Flow-boiling and Flow-condensation: Context, Results and Recommendations

laminar flow in annular conduits

the flow of fluids in annular conduits has been studied for over sixty years, however the resulted data are very scattered. in this paper the problem is analytically solved, starting out with navier-stokes equations. a computer solution is used to determine the shape of velocity profiles, the discharge and the friction factor in a large number of concentric and eccentric annular conduits. the e...

Corrugated interfaces in multiphase core-annular flow

Microfluidic devices can be used to produce highly controlled and monodisperse double or multiple emulsions. The presence of inner drops inside a jet of the middle phase introduces deformations in the jet, which leads to breakup into monodisperse double emulsions. However, the ability to generate double emulsions can be compromised when the interfacial tension between the middle and outer phase...

Stability of Annular Flow and Slugging

In this work we propose an effective viscosity criterion for the stabilization of annular gas-liquid and liquid-particle flows and an inertial mechanism which drives waves into slugs in slugging gas-liquid flows. Annular flow is stable when the fluid having the higher effective viscosity occupies the core region and the lower viscosity fluid is the annulus. The eddy viscosity criterion is shown...