Flow Control of Compressible Turbulent Shear Layers

Numerical Simulation of Turbulent Subsonic Compressible Flow through Rectangular Microchannel

In this study, turbulent compressible gas flow in a rectangular micro-channel is numerically investigated. The gas flow assumed to be in the subsonic regime up to Mach number about 0.7. Five low and high Reynolds number RANS turbulence models are used for modeling the turbulent flow. Two types of mesh are generated depending on the employed turbulence model. The computations are performed for R...

Some characteristics of thin shear layers in homogeneous turbulent flow.

Tomographic particle image velocimetry measurements of homogeneous isotropic turbulence that have been made in a large mixing tank facility at Cambridge are analysed in order to characterize thin highly sheared regions that have been observed. The results indicate that such regions coincide with regions of high enstrophy, dissipation and stretching. Large velocity jumps are observed across the ...

The Development of Free Turbulent Shear Layers

The development of a two-dimensional, free turbulent shear layer from an arbitrary initial velocity profile is analyzed theoretically. Included in the analysis are effects of both heat transfer and compressibility. The mean flow is described by approximate velocity profiles containing an unknown position parameter which is dependent upon the development length. Integral forms of the continuity ...

Leray simulation of turbulent shear layers

Buoyant turbulent mixing in shear layers

Buoyancy effects in unstably stratified mixing layers express themselves through gravity currents of heavy fluid which propagate in an ambient lighter fluid. These currents are encountered in numerous geophysical flows, industrial safety and environmental protection issues [1] . During transition to turbulence a strong distortion of the separating interface between regions containing ‘heavy’ or...