Flow condensation heat transfer of propane refrigerant inside a horizontal micro-fin tube

نویسندگان

چکیده

Abstract Due to the phase-out of CFCs and HCFC refrigerants, propane is a nature refrigerant occurring substance produced by natural gas production oil refining. As result, has higher latent heat lower density than conventional refrigerants while maintaining comparable saturation pressure thermal conductivity. So, already widely used in domestic fridges freezers for many years. However, propane’s operating pressures temperatures are well suited air conditioning equipment, including chillers. This study investigates contributions different transfer mechanisms two-phase flow condensation coefficients inside 6.3-mm ID micro-fin copper tube. Data were collected through an experiment with condensation. Measurements taken at mass fluxes from 100 300 kg/m 2 s 3 9 kW/m . In addition, experiments investigated effect vapor quality, flux, flux on coefficients. Finally, new coefficient correlation was developed based experimental data good agreement.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Experimental and Theoretical Study on Condensation Heat Transfer of Nonazeotropic Refrigerant Mixtures R1234yf/R32 Inside a Horizontal Smooth Tube

The condensation heat transfer characteristics of nonazeotropic mixtures R1234yf and R32 (mass fractions of 0.52:0.48 and 0.77:0.23, respectively) inside a horizontal smooth tube (inner diameter 4 mm) were experimentally studied at mass fluxes ranging from 100 to 300 kg/m s. A prediction model for the forced convective condensation heat transfer characteristics of nonazeotropic refrigerant mixt...

متن کامل

Experimental Investigation of the Condensation Heat Transfer Coefficient of R134a inside Horizontal Smooth and Micro-Fin Tubes

The condensation heat transfer coefficient of R134a was experimentally studied inside two smooth and four micro-fin tubes. The working conditions and structural parameters of the test tubes were selected as the influencing factors, and the experiment was conducted under mass velocities of 400–1100 kg·m−2·s−1, condensation temperatures of 35–45 ◦C and water-testing Reynolds numbers of 8000–22,00...

متن کامل

Flow Boiling Heat Transfer and Pressure Drop of R1234ze(E) and R32 in a Horizontal Micro-Fin Tube

In the present study, the flow boiling heat transfer of R1234ze(E), R32 and zeotropic mixture R1234ze(E)/R32 (50/50 mass%) in a horizontal micro-fin tube is experimentally investigated to clarify the pressure drop and heat transfer characteristics. Tested micro-fin tube is made of copper, and its geometry is as follows, 6.00 mm in outer diameter, 5.21 mm in mean inside diameter, 0.26 mm in fin ...

متن کامل

Convective Heat Transfer of Oil Based Nanofluid Flow Inside a Circular Tube

Abstract   An empirical investigation was carried out to study convective heat transfer of nanofluid flow inside an inclined copper tube under uniform heat flux condition. Required data are acquired for laminar and hydrodynamically fully developed flow inside round tube. The stable CuO-base oil nanofluid with different nanoparticle weight fractions of 0.5%, 1% and 2% was produced by means of ul...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: International Journal of Air-Conditioning and Refrigeration

سال: 2022

ISSN: ['2010-1333']

DOI: https://doi.org/10.1007/s44189-022-00014-4