Flow Characteristics of a Steam-Injection Vacuum Pasteurizer

Flow characteristics of a pilot-scale high temperature, short time pasteurizer.

In this study, we present a method for determining the fastest moving particle (FMP) and residence time distribution (RTD) in a pilot-scale high temperature, short time (HTST) pasteurizer to ensure that laboratory or pilot-scale HTST apparatus meets the Pasteurized Milk Ordinance standards for pasteurization of milk and can be used for obtaining thermal inactivation data. The overall dimensions...

Remediation by steam injection

Vacuum Drying Characteristics of Some Vegetables

In this research the drying of four kinds of vegetables was investigated in a vacuum dryer. The effect of temperature on drying rate of samples at various temperatures (30, 35 and 45 °C) was studied. Six thin-layer drying models were fitted to drying data and suitable model was selected from them. Then effective moisture diffusivity and ...

Turbulent characteristics in flow subjected to bed suction and jet injection as a pier-scour countermeasure

The effect of a combined system of the bed suction and jet injection as a pier-scour countermeasure on the turbulent flow field is studied in a laboratory flume using an Acoustic Doppler Velocimeter (ADV). The three components of the velocities in the vertical symmetry plane in the equilibrium scour hole in front and rear of the pier under 3-jet injections and bed suction rate Qs/Q0 = 2%located...

Numerical Modeling of Wet Steam Flow in Steam Turbine Channel

In power station practice, work is extracted from expanding steam in three stages namely High Pressure(HP), Intermediate Pressure(IP) and Low Pressure(LP) turbines. During the expansion process in the LP turbine, the steam cools down and at some stages, it nucleates to become a two-phase mixture. It is well-acknowledged in the literature that the nucleating and wet stages in steam turbines are ...