Flow Characteristics and Heat Transfer Enhancement of Sinusoidal Corrugated Channels with Different Configurations
نویسندگان
چکیده
This study investigated flow characteristics and heat transfer enhancement in various sinusoidal corrugated channels. The channel height the phase shift effects on structures thermal performances were examined numerically for Reynolds numbers range of 2500≤Re≤7500. geometrical configurations this cover three different heights (Hmin/Hmax=0.36, 0.54, 0.72) angles (φ=0°, 90°, 180°). Velocity distribution, turbulence intensity, local averaged Nusselt numbers, friction factor calculated configurations. Finally, performance factors (TPF) also to determine optimum configuration and
 operating condition.
منابع مشابه
Numerical Comparison of Turbulent Heat Transfer and Flow Characteristics of SiO2/Water Nanofluid within Helically Corrugated Tubes and Plain Tube
Turbulent heat transfer in Helically Corrugated Tubes (HCT) was numerically investigated for pure water and SiO2 nanofluid using Computational Fluid Dynamics (CFD). This study was carried out for different corrugating pitches (5, 7, 8 mm) and heights (0.5, 0.75, 1.25 mm) at various Reynolds numbers ranging from 5000 to 13300. The effect of nanoparticles on heat transfer augmentation for plain t...
متن کاملInvestigation of flow and heat transfer of nanofluid in a diverging sinusoidal channel
Using of nanofluids and ducts with corrugated walls are both supposed to enhance heat transfer, by increasing the heat transfer fluid conductivity and the heat transfer area respectively. Use of a diverging duct with a jet at inlet section may further increase heat transfer by creating recirculation zones inside the duct. In this work two-dimensional incompressible laminar flow of a nanofluid e...
متن کاملInvestigation of flow and heat transfer of nanofluid in a diverging sinusoidal channel
Using of nanofluids and ducts with corrugated walls are both supposed to enhance heat transfer, by increasing the heat transfer fluid conductivity and the heat transfer area respectively. Use of a diverging duct with a jet at inlet section may further increase heat transfer by creating recirculation zones inside the duct. In this work two-dimensional incompressible laminar flow of a nanofluid e...
متن کاملFluid Flow and Heat Transfer of Nanofluids over a Flat Plate with Conjugate Heat Transfer
The falling and settling of solid particles in gases and liquids is a natural phenomenon happens in many industrial processes. This phenomenon has altered pure forced convection to a combination of heat conduction and heat convection in a flow over a plate. In this paper, the coupling of conduction (inside the plate) and forced convection of a non-homogeneous nanofluid flow (over a flat plate) ...
متن کاملNumerical simulation of nanofluids flow and heat transfer through isosceles triangular channels
Nanofluids are stable suspensions of nanoparticles in conventional heat transfer fluids (base fluids) that exhibit better thermal characteristics compared to those of the base fluids. It is important to clarify various aspects of nanofluids behavior. In order to identify the thermal and hydrodynamic behavior of nanofluids flowing through non-circular ducts, in the present study the laminar flow...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Çukurova Üniversitesi Mühendislik Fakültesi Dergisi
سال: 2022
ISSN: ['2757-9255']
DOI: https://doi.org/10.21605/cukurovaumfd.1094986