Flow boiling heat transfer characteristics of two-phase flow in microchannels
نویسندگان
چکیده
A set of experimental platforms with widths 0.5, 1.0, 1.5, and 2.0 mm was established to explore the mechanism flow boiling bubble dynamics in microchannels, focusing on heat transfer characteristics, pressure loss, two-phase pattern identification. Bubble flow, restricted dry area were observed all four channels. The appearance related rate channel width. Under condition same width, initial flux subcooled gradually increased increase rate, this change trend close linear trend. decrease This due faster working medium narrow channel, resulting heating time. generation frequency directly led wall coefficient separation diameter. Mathematical analysis showed that under small reduction size total coefficient. In condition, cannot enhance transfer. With increasing volume range hydrodynamic control index decreased. When large, greatly size. theoretical values good agreement data.
منابع مشابه
Heat Transfer Mechanisms During Flow Boiling in Microchannels
The forces due to surface tension and momentum change during evaporation, in conjunction with the forces due to viscous shear and inertia, govern the two-phase flow patterns and the heat transfer characteristics during flow boiling in microchannels. These forces are analyzed in this paper, and two new nondimensional groups, K1 and K2 , relevant to flow boiling phenomenon are derived. These grou...
متن کاملHeat Transfer Coefficient, Two-Phase Flow Boiling of HFC134a
Experimental measurements of local heat tra nsfer coefficients and pressure drop are made for forced conv ection boiling and condensation for R134a-oil mixtures inside a horizontal tube. The results are compared with the experime ntal data of pure Rl34a. Average convection boiling and cond ensation heat transfer coefficients decreased about 20% at a 10\ o il mass fraction, and boiling and conde...
متن کاملTwo Phase Flow Simulation for Subcooled Nucleat Boiling Heat Transfer Calculation in Water Jacket of Diesel Engine
Basic understanding of the process of coolant heat transfer inside an engine is an indispensable prerequisite to devise an infallible cooling strategy. Coolant flow and its heat transfer affect the cooling efficiency, thermal load of heated components, and thermal efficiency of a diesel engine. An efficient approach to studying cooling system for diesel engine is a 3D computational fluid dynami...
متن کاملFlow boiling heat transfer in two-phase micro-channel heat sinks––II. Annular two-phase flow model
This paper is Part II of a two-part study devoted to measurement and prediction of the saturated flow boiling heat transfer coefficient in water-cooled micro-channel heat sinks. Part I discussed the experimental findings from the study, and identified unique aspects of flow boiling in micro-channels such as abrupt transition to the annular flow regime near the point of zero thermodynamic equili...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: AIP Advances
سال: 2022
ISSN: ['2158-3226']
DOI: https://doi.org/10.1063/5.0095786