Flow around Turbulence Promoters in Parallel Channel, (II)
نویسندگان
چکیده
منابع مشابه
Parametric study of a viscoelastic RANS turbulence model in the fully developed channel flow
One of the newest of viscoelastic RANS turbulence models for drag reducing channel flow with polymer additives is studied in different flow and rheological properties. In this model, finitely extensible nonlinear elastic-Peterlin (FENE-P) constitutive model is used to describe the viscoelastic effect of polymer solution and turbulence model is developed in the k-ϵ-(ν^2 ) ̅-f framework. The geome...
متن کاملexperimental investigation of flow turbulence effects on the flow wake parameters around a naca0012 airfoil
in this paper, inflow turbulence effects on the flow wake parameters around a naca0012 airfoil at zero incidence angle and reynolds number of 38,700 were investigated. various turbulence promoter networks were used to achieve turbulence intensity of 5% and 6%. experiments have been conducted for three different turbulence intensities in which mean velocity parameters, turbulence intensity, freq...
متن کاملA study of turbulence in open channel flow
Three series of experiments were conducted to study the effect of Reynolds number, near-wall perturbation and background turbulence on the characteristics of smooth open channel flows. Measurements were carried out using a laser Doppler anemometer. The variables of interest include the mean velocity, the turbulence intensity, probability density distribution and Gram-Charlier series coefficient...
متن کاملPlastic deformation analysis in parallel tubular channel angular pressing (PTCAP)
Parallel tubular channel angular pressing (PTCAP) process is a novel recently developed severe plastic deformation technique for fabrication of ultrafine grained (UFG) metallic tubes. This new process consists of two half cycles and is affected by several parameters such as channel angles, deformation ratio and curvature angles. In this paper, the effects of these parameters on the plastic defo...
متن کاملModeling heat and mass transfer in laminar forced flow between parallel plates channel imposed to suction or injection
A numerical model is developed to simulate the transport phenomena in the flow channel between parallel plates with porous and non-porous (or impermeable) walls. The continuity and momentum equations were solved first, assuming the wall Reynolds number in the range of with the suction or injection of air at a speed equal to the uniform inlet velocity. The results show that at constant inlet and...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Nuclear Science and Technology
سال: 1983
ISSN: 0022-3131,1881-1248
DOI: 10.1080/18811248.1983.9733408