Flow and Heat Transfer in a Trapezoidal Cross-Sectional Microchannel Heat Sink Using Nanofluid
نویسندگان
چکیده
In this study, the effects of microchannel number, volume concentration, Reynolds and nanofluid type on heat transfer flow characteristics in sink consisting trapezoidal microchannels are investigated numerically. Governing equations solved by assuming three-dimensional, incompressible, steady laminar flow. The channel material is chosen as copper, a constant flux boundary condition defined upper wall sink. For two different nanofluids, CuO-water Al2O3-water, parameters number channels (n=3-5) sink, (Re=200-1500), concentration (=0-4%). Results show that using nanoparticles base fluid causes to increase both coefficient pressure drop. Heat increases with increasing cross-sectional number. Pressure drop enhances enhancing do not importantly affect friction factor. According performance index, it seen adding CuO water convenient, but Al2O3 appropriate. It observed for affects thermal performance, Al2O3-water does affect.
منابع مشابه
Experimental study of convective heat transfer coefficient of MgO nanofluid in a cylindrical microchannel heat sink
Convective heat transfer of MgO-water nanofluid in a microchannel heat sink is experimentally investigated in various concentrations of 0.01, 0.05, 0.1, and 0.6 wt%. The microchannel consisted of 48 parallel rectangular cross section channels with the height of 800 µm, width of 524 µm and length of 52 mm. A well stability duration (ca. 1 month) was resulted by a 180 min ultra-sonication of the ...
متن کاملNumerical investigation of heat transfer and laminar Water-Al2O3 nanofluid flow in a rectangular Rib-Microchannel
در تحقیق حاضر در مورد اثرات ارتفاع دندانه در میکروکانال دندانهدار دو بعدی، بر روی پارامترهای انتقال حرارت و دینامیک سیالات محاسباتی جریان آرام نانوسیال آب-اکسید آلومینیم است. بررسیهای این تحقیق به صورت عددی با نرم افزار تجاری فلوئنت3/6 برای اعداد رینولدز10 و 100، برای چهار حالت مختلف ارتفاع دندانه انجام شده است. افزایش ارتفاع دندانههای داخلی یا مغشوشگرهای جریان، عملکرد انتقال حرارت جابجایی د...
متن کاملHeat transfer in MHD nanofluid flow over a cone and plate in the presence of heat source/sink
In this study, we presented a mathematical model for analyzing the heat source/sink effect on magnetohydrodynamic two-dimensional ferrofluid flow past a cone and a vertical plate in the presence of volume fraction of ferrous nanoparticles. The governing partial differential equations are transformed as ordinary differential equations making use of similarity solutions and solved numerically wit...
متن کاملFlow field, heat transfer and entropy generation of nanofluid in a microchannel using the finite volume method
In this study, the finite volume method and the SIMPLER algorithm is employed to investigate forced convection and entropy generation of Cu-water nanofluid in a parallel plate microchannel. There are four obstacles through the microchannel, and the slip velocity and temperature jump boundary conditions are considered in the governing equations to increase the accuracy of modeling. The study is ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Gazi university journal of science
سال: 2021
ISSN: ['2147-1762']
DOI: https://doi.org/10.35378/gujs.806591