Flow Analysis of Intake Manifold Using Computational Fluid Dynamics

نویسندگان

چکیده

The main element of the air intake system is an manifold. These are components which control flow value that will be used in combustion chamber. Thisstudyaimsto analyse velocity distribution all runners and to compare design manifold previous study. Simulations performed on two types Design 1, inlet end located next regulator chamber whilst for 2, inthe middle Intake parameters such as distribution, unevenness pressure losses along runner determine better performance. From results, velocity,and these twotypes determined. Compared with study, difference 0.05%. This showed simulation result obtained this study accordance Next, percentage between 1 approximately 4%. Furthermore, 2 0.3% achieved range acceptable values 2500Pa 3000Pa. results evenness each shows met criteria exhibited best improvement compared 2% improvement.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Multiphase flow and tromp curve simulation of dense medium cyclones using Computational Fluid Dynamics

Dense Medium Cyclone is a high capacity device that is widely used in coal preparation. It is simple in design but the swirling turbulent flow, the presence of medium and coal with different density and size fraction and the presence of the air-core make the flow pattern in DMCs complex. In this article the flow pattern simulation of DMC is performed with computational fluid dynamics and Fluent...

متن کامل

stem cells culture bioreactorfluid flow, shear stress and micro-carriers dispersion analysis using computational fluid dynamics

the growth rate of stem cells in mobius cellready 3l bioreactor has been studied using comsol multi-physics simulation software in order to find out the best operational parameters for secure cell growth. the bioreactor geometry was defined according to the emd millipore issued information while turbulent and unsteady state solid-liquid 2-phase fluid flow equations were used for modelling the b...

متن کامل

Analytical and comparative investigations on counter flow heat exchanger using computational fluid dynamics

This paper presents a comprehensive and exclusive thermodynamic analysis of counter flow heat exchanger under various operating and geometrical conditions. Analysis system (ANSYS) workbench 14.0 has been used for computational analysis and comparison with previous literature has been carried out in view of variable temperature and mass flow rate of hot and cold fluids. An analytical and statist...

متن کامل

Muscle Architecture Analysis Using Computational Fluid Dynamics

The trajectories of skeletal muscle fascicles are critical to their function, and many skeletal muscles across the body have fascicles with highly complex trajectories. Architectural descriptions of muscles account for fascicle trajectories by reporting parameters such as fascicle length, physiological cross-sectional area, and pennation angle. These parameters are typically reported as constan...

متن کامل

multiphase flow and tromp curve simulation of dense medium cyclones using computational fluid dynamics

dense medium cyclone is a high capacity device that is widely used in coal preparation. it is simple in design but the swirling turbulent flow, the presence of medium and coal with different density and size fraction and the presence of the air-core make the flow pattern in dmcs complex. in this article the flow pattern simulation of dmc is performed with computational fluid dynamics and fluent...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: International Journal of Integrated Engineering

سال: 2023

ISSN: ['2229-838X', '2600-7916']

DOI: https://doi.org/10.30880/ijie.2023.15.01.008