Flotation Characteristics of Secondary Copper Minerals

Surface Properties and Flotation Characteristics of Boron Minerals

Flotation of soluble salt minerals such as potash, trona and borax exhibits similarities because all are conducted in their brine solutions. The most commercially important boron minerals in the world are borax (Na2B4O7.10H2O), colemanite (Ca2B6O11.5H2O), ulexite (NaCaB5O9.8H2O), and kernite (Na2B4O7.4H2O). Most of them contain low grades when mined and must be upgraded by mineral processing te...

Vitrification of copper flotation waste.

The vitrification of an hazardous iron-rich waste (W), arising from slag flotation of copper production, was studied. Two glasses, containing 30wt% W were melted for 30min at 1400 degrees C. The first batch, labeled WSZ, was obtained by mixing W, blast furnace slag (S) and zeolite tuff (Z), whereas the second, labeled WG, was prepared by mixing W, glass cullet (G), sand and limestone. The glass...

Recovery of Copper from Copper Slag and Copper Slag Flotation Tailings by Oxidative Leaching

Copper smelter slag and copper smelter slag flotation tailings were leached using sulphuric acid solutions, without or with the addition of either ferric sulphate or hydrogen peroxide. Copper extraction from the slag was typically found to be twice as high as that from the slag flotation tailings. Hydrogen peroxide was determined to be the best lixiviant. Thus, copper and iron extractions were ...

Multichannel reflectance spectral assaying of zinc and copper flotation slurries

Dating of Secondary Minerals in Nakhlites