Flexural Strengthening of Reinforced Concrete Beams with Externally Bonded Hybrid FRP Laminate
نویسندگان
چکیده
This paper enumerates the effectiveness of externally bonded Hybrid Fiber Reinforced Polymers (HyFRP) laminates on reinforced concrete beams for flexural strengthening. A total 5reinforced size 150 x 250 in cross section and length 3000mm were considered this study. All tested four-point bending over a simple span 2800 mm. Of above five beams, one beam served as reference other four HyFRP laminated. The variables study included thickness laminate composite ratio. Adequate measurement was acquired load deflection characteristic strengthened well beam.
منابع مشابه
Numerical Simulation of Debonding Failure of Reinforced Concrete Beams Strengthened with Externally Bonded Frp
As the life age of the existing structures are required to meet the changing demands on civil infrastructures. So strengthening and retrofitting are required. Recently many techniques to strengthen the reinforced concrete beams in flexural by using fiber reinforced polymer (FRP) had appeared. The most famous technique among them is strengthening the (RC) beams with externally bonded FRP sheet t...
متن کاملDebonding-Related Strain Limits for Externally Bonded FRP Sheets in Flexurally Strengthened Reinforced Concrete Beams
Debonding problems of externally bonded fiber reinforced polymer (FRP) sheets in flexurally FRP-strengthened reinforced concrete (RC) beams have been a concern and a research challenge since their application of this strengthening technique. Intermediate crack induced debonding is the most common failure mode which is that the debonding initiates at the critical flexural-shear or flexural crack...
متن کاملFlexural Strengthening of Deficient Reinforced Concrete Beams with Post-Tensioned Carbon Composites using Finite Element Modelling
The application of external post-tensioned steel bars as an effective way to strengthen an existing bridge has been so far used in many different countries. In recent decades, however, they have been replaced by bars made from Carbon Fiber Reinforced Polymer (CFRP), as a material with high tensile strength and corrosion resistance, to address several concerns with steel bars such as their appli...
متن کاملAn Assessment of In-situ Frp Shear and Flexural Strengthening of Reinforced Concrete Joists
This study examines the in-situ shear performance and modes of failure of reinforced concrete (RC) T-beams (joists) strengthened with externally bonded carbon fiber reinforced polymer (CFRP) sheets. The experimental program consisted of testing a series of nine structural components at the Malcom Bliss Hospital, in St.Louis, Missouri. The members were tested to validate the different systems an...
متن کاملFRP for Flexural Strengthening of Timber Bridge Beams
The majority of timber bridges in Canada requires flexural and/or shear strengthening to increase their load-carrying capacity in response to the demand to increase the allowable gross vehicle weight. This paper presents an innovative approach for the use of fibre reinforced polymers (FRP) to strengthen timber bridges. The advantages of this strengthening system are inevitable: fibre reinforced...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International journal of recent technology and engineering
سال: 2021
ISSN: ['2277-3878']
DOI: https://doi.org/10.35940/ijrte.c6422.0910321