Flexural strength and failure modes of layered ceramic structures
نویسندگان
چکیده
منابع مشابه
Failure Modes and Flexural Ductility of Steel Moment Connections
1 Associate Research Fellow,Center for Research on Earthquake Engineering (NCREE), Chinese Taiwan 2 Professor, Dept. of Civil Engineering, Taiwan University, Taipei, Chinese Taiwan 3 Assistant Professor, Dept. of Civil and Environmental Engineering, University of Kaohsiung, Kaohsiung, Chinese Taiwan Email: [email protected] ABSTRACT : Ductility is the main attribute of steel moment connections...
متن کاملFailure Modes of Laminate Structures
Laminate structures composed of alternating thin layers of conductor and dielectric material are commonly used in energy storage and transmission components. The failure of the dielectric layers in regions of high field stress, with applied 60 Hz ac, de and impulse voltages, was studied. Several geometries were compared, including staggered and fiush edges. Electrical trees developed between th...
متن کاملFailure Modes in Ceramic-Based Layer Structures: A Basis for Materials Design of Dental Crowns
A research program on failure modes induced by spherical indenters in brittle layer structures bonded to polymeric substrates, in simulation of occlusal function in all-ceramic dental crowns, is surveyed. Tests are made on model flat and curved layers bonded onto a dentin-like polymer base, in bilayer (ceramic/polymer) and trilayer (ceramic/ceramic/polymer) configurations. All-transparent syste...
متن کاملComparison between Biaxial Flexural Strength and Microstructure of Polished and Glaze-Fired Specimens of Zirconia Lithium Silicate Glass Ceramic
Introduction: There has been a growing interest in glass ceramic systems with good esthetics, high fracture resistance, bonding durability, and simplified fabrication techniques using CAD/CAM. The aim of this study was to compare flexural strength in "polished" and "glazed and fired" specimens of zirconium lithium silicate (ZLS) CAD/CAM blocks Celtra Duo. Methods</stron...
متن کاملFlexural Strength of Preheated Resin Composites and Bonding Properties to Glass-Ceramic and Dentin
To test the impact of preheating (25, 37, 54, or 68 °C) of TetricEvoCeram (TEC), FiltekSupremeXT (FSXT), and Venus (V) on flexural strength (FS), shear bond strength (SBS) and interfacial tension (IFT). FS was tested with TEC and FSXT. For SBS, glass-ceramic and human dentin substrate were fabricated and luted with the preheated resin composite (RC). SBSs of 1500 thermal cycled specimens were m...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Dental Materials
سال: 2011
ISSN: 0109-5641
DOI: 10.1016/j.dental.2011.09.008