FLEXURAL REINFORCED CONCRETE MEMBERS WITH MINIMUM REINFORCEMENT UNDER LOW-VELOCITY IMPACT LOAD
نویسندگان
چکیده
منابع مشابه
load displacement behavior of concrete beam under monotonic static and low velocity impact load
experiments were carried out to observe the influence of loading type on concrete beam specimens. beam specimens made of similar concrete mixture with the same geometry were tested under three point static loading and low velocity drop weight impact loading. load – displacement behavior, absorbed energy dissipation capacity, stiffnesses, failure modes of beam specimens were obtained and discuss...
متن کاملFinite Element Analysis of Reinforced Concrete Column Under Lateral Load
To serve its purpose a structure must be safe against collapse and serviceable in use. Serviceability requires that deflections be adequately small to keep the cracks within tolerable limits. Although the widely followed ACI Code suggests a detailed method of deflection calculation, it often cannot exactly perceive the actual behavior of a structure. For this purpose, finite element analysis, u...
متن کاملApplication of Hydrophilic Silanol-Based Chemical Grout for Strengthening Damaged Reinforced Concrete Flexural Members
In this study, hydrophilic chemical grout using silanol (HCGS) was adopted to overcome the performance limitations of epoxy materials used for strengthening existing buildings and civil engineering structures. The enhanced material performances of HCGS were introduced, and applied to the section enlargement method, which is one of the typical structural strengthening methods used in practice. T...
متن کاملTopology Optimization of Strut-and-Tie Models in Non-Flexural Reinforced Concrete Members
This paper deals with the topology optimization of strut-and-tie models in non-flexural reinforced concrete members by using the Evolutionary Structural Optimization (ESO) method for plane stress continuum structures with displacement constraints. By means of systematically removing elements that have less contribution to the stiffness from the discritized concrete member, the actual load paths...
متن کاملBond Deformability of Reinforced Concrete Members
The usual earthquake resistant design philosophy of ductile frame buildings allows the beams to form plastic hinges adjacent to beam-column connections. In order to carry out this design philosophy, the ultimate bond or shear strength of the beam should be greater than the flexural yielding force and should not degrade before reaching its required ductility. The behavior of RC members dominated...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of GEOMATE
سال: 2018
ISSN: 2186-2982,2186-2990
DOI: 10.21660/2018.46.str107