Flexural quasi-static and fatigue behaviours of fused filament deposited PA6 and PA12 polymers

نویسندگان

چکیده

The present paper aims to compare study the effect of porosity and degree crystallinity on both quasi-static fatigue behaviours PA6 PA12 specimens obtained by fused filament fabrication (FFF). glass transition melting temperatures were measured complementary understand better process. Fatigue analysis is here described in visco-elastic domain material. results highlight that mechanical properties PA 12 are than those PA6, spite almost amorphous state PA12. Besides, did not reveal expected influence these properties. also compared with conventional techniques given literature review.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Mechanical Properties of Graphene/Epoxy Nanocomposites under Static and Flexural Fatigue Loadings

In the present study, the effect of various weight fractions of graphene nanoplatelet (GPL) on flexural fatigue behavior of epoxy polymer has been investigated at room temperature and generally the temperature was monitored on the surface of specimen during each test. The flexural stiffness of grapheme nano-platelet/epoxy nanocomposites at 0.1, 0.25 and 0.5 wt. % as a main effective parameter o...

متن کامل

Fatigue and Anisotropic behaviours of cold rolled AA1200 Aluminium Alloy

This study examines the fatigue and anisotropy behaviour of cold rolled AA1200 aluminium alloy for light weight automotive connecting rod application. Aluminium (Al) 1200 ingots were melted at temperature of 680 0C (after one hour of heating) cast in sand mould and cast samples homogenized for 6 hrs at 480 0C. The cold rolling process was carried out after homogenisation for 10, 20, 30, 40 and ...

متن کامل

mechanical properties of graphene/epoxy nanocomposites under static and flexural fatigue loadings

in the present study, the effect of various weight fractions of graphene nanoplatelet (gpl) on flexural fatigue behavior of epoxy polymer has been investigated at room temperature and generally the temperature was monitored on the surface of specimen during each test. the flexural stiffness of grapheme nano-platelet/epoxy nanocomposites at 0.1, 0.25 and 0.5 wt. % as a main effective parameter o...

متن کامل

Colored fused filament fabrication

Fig. 1. Our technique enables color printing with precisely controlled gradients using a filament printer. Le : The printer is equipped with an o -the-shelf nozzle that inputs multiple filaments (three in the picture) and outputs molten mixed plastic through a single exit hole. Such devices cannot directly be used to print gradients: the transition between mixtures takes time, and this timing v...

متن کامل

Dynamic and Quasi-Static Tensile Properties of Structural S400 Steel

The study of mechanical behavior of the structural steel S400 under quasi- static and dynamic loading has been the subject of this investigation. In oder to obtain different stress - triaxiality conditions the specimens were notched with 1, 1.5, 2 and 3.5 mm notch radius. The results of fractography show as the velocity of tension increases, ductility reduces and a ductile-brittle transition oc...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: The International Journal of Advanced Manufacturing Technology

سال: 2021

ISSN: ['1433-3015', '0268-3768']

DOI: https://doi.org/10.1007/s00170-021-07223-y