Flexural Performance of FRP-Reinforced Geopolymer Concrete Beam
نویسندگان
چکیده
منابع مشابه
Performance Evaluation of an FRP-Reinforced Concrete Bridge
As part of a larger project to investigate the use of Fiber-Reinforced Polymer (FRP) materials in bridge construction, a short-span FRP-reinforced concrete bridge was installed in central Missouri. The Walters Street Bridge is a precast concrete panel bridge reinforced with both glass FRP (GFRP) and carbon FRP (CFRP) reinforcing bars. It was designed according to the American Concrete Institute...
متن کاملSeismic Performance Analysis of FRP Reinforced Concrete Frame Structure
Based on the experimental study for seismic performance of FRP reinforced concrete beam-column joints, two-storey two-span plane frames were taken for examples, in which the static elastoplastic analysis (the pushover method) was carried on the joints of the FRP strengthened concrete frames, and then the comparative analysis was made on seismic performance of RFP strengthened frame structure th...
متن کاملAn Assessment of In-situ Frp Shear and Flexural Strengthening of Reinforced Concrete Joists
This study examines the in-situ shear performance and modes of failure of reinforced concrete (RC) T-beams (joists) strengthened with externally bonded carbon fiber reinforced polymer (CFRP) sheets. The experimental program consisted of testing a series of nine structural components at the Malcom Bliss Hospital, in St.Louis, Missouri. The members were tested to validate the different systems an...
متن کاملFlexural performance of layered ECC-concrete composite beam
The pseudo strain-hardening behavior of fiber reinforced engineered cementitious composites (ECC) is a desirable characteristic for it to act as a substitute for concrete to suppress brittle failure. The use of ECC in the industry is, however, limited by its high cost. To achieve higher cost/performance ratio, ECC can be strategically applied in parts of a structure that is under relatively hig...
متن کاملCommercialization of FRP reinforced glulam beam technology
Thin laminates made of high-strength pultruded fiber reinforced polymers (FRP) have been developed to reinforce gluelaminated timber (glulam) beams. The FRP reinforced glulams are significantly stiffer, stronger, and have less variation in bending strength than a conventional (unreinforced) glulam of equal size. Following the technical development and model building code approval of design proc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Composites Science
سال: 2020
ISSN: 2504-477X
DOI: 10.3390/jcs4040187