Flexural Performance and Toughness Characteristics of Geogrid-Reinforced Pervious Concrete with Different Aggregate Sizes
نویسندگان
چکیده
منابع مشابه
Flexural Toughness of Steel Fiber Reinforced High Performance Concrete Containing Nano-SiO2 and Fly Ash
This paper aims to clarify the effect of steel fiber on the flexural toughness of the high performance concrete containing fly ash and nano-SiO2. The flexural toughness was evaluated by two methods, which are based on ASTM C1018 and DBV-1998, respectively. By means of three-point bending method, the flexural toughness indices, variation coefficients of bearing capacity, deformation energy, and ...
متن کاملStrength and Toughness of Reinforced Concrete with Coated Steel Fibers
The effect of zinc phosphate (ZP) and zinc calcium phosphate (ZCP) coatings on the reinforcing mechanisms of smooth steel fiber in cementitious matrix have been studied. The results of pull out tests illustrated that by coating smooth steel fiber the pull-out load may be increased up to 100%. The effect of zinc phosphate coating on interface bonding was more than zinc-calcium phosphate coating....
متن کاملThe Effects of Aggregate Sizes and Fiber Volume Fraction on Bending Toughness and Direct Tension of Steel Fiber Reinforced Concrete
Twisted 0.375 30 80 2,300 1 Abstract—In order to supplement the brittle property of concrete, fibers are added into concrete mixtures. Compared to general concrete, various characteristics such as tensile strength, bending strength, bending toughness, and resistance to crack are superior, and even when cracks occur, improvements on toughness as well as resistance to shock are excellent due to t...
متن کاملPerformance of Continuously Reinforced Concrete Pavement Containing Recycled Concrete Aggregate
In 1995, the Texas Department of Transportation (TxDOT) began reconstruction in Houston on a section of IH-10 with continuously reinforced concrete pavement (CRCP). The unique aspect of this project was the use of crushed concrete as both coarse and fine aggregates in the new concrete. No virgin aggregates were used. The primary objectives of this study were to evaluate (1) the material propert...
متن کاملMicromechanical modeling of fiber reinforced pervious concrete composites
Pervious concrete is widely used in today’s construction industry, e.g.. parking lots, airport runways, etc. However, the durability and strength of the porous concrete remains a challenge, as the binding material proportion is low and the use of fi ne aggregates is nearly 0. Increasing the compressive load, the failure appears fi rst in the weak concrete zone induced by the random distribution...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2021
ISSN: 1996-1944
DOI: 10.3390/ma14092295