FLEXURAL CAPACITY ASSESSMENT OF BRICK AGGREGATED PRE-CRACKED RC BEAM STRENGTHENED WITH CARBON FIBER POLYMER
نویسندگان
چکیده
منابع مشابه
Flexural Capacity of Rc Beams Strengthened with Srp and Srg
The use of externally bonded Steel-Reinforced Polymer (SRP) and Steel Reinforced Grout (SRG) composites is a promising new technology for increasing the flexural and shear capacities of reinforced concrete (RC) members. The reinforcement system in these composites is a sheet made up of unidirectional cords consisting of tightly wound ultra high strength steel wires. The reinforcement can be mol...
متن کاملCapacity Assessment of Gld Rc Frames Strengthened with Frp
Many gravity load designed (GLD) reinforced concrete (RC) frames are nowadays located in seismic areas. Different strengthening methodologies have been proposed in the past; an innovative technique based on the use of composites was proposed and validated by an experimental program developed at University of Missouri-Rolla. A theoretical approach for the assessment of the subassemblage capacity...
متن کاملBehavior of Coupling Beams Strengthened with Carbon Fiber Reinforced Polymer Sheets
In this research, using the results of 6 tests, the effect of Carbon Fiber Reinforced Polymer (CFRP) sheets on the behavior of reinforced concrete coupling beams of shear walls is studied. First, in the experimental part of the study, four coupling beams with different reinforcements were manufactured and tested. Then, after the failure of the specimens, two of them were rehabilitated and stren...
متن کاملPre-Cracked Concrete Shear Strengthened with External CFRP Strips
In reinforced concrete design, there are situations where transfer of shear across a specific plane needs to be considered. Examples of such situation include corbels, bearing shoes, ledger beam bearing, and a host of connection between precast concrete elements. In this study, the shear transfer behavior of reinforced concrete is investigated experimentally by conducting test on 6 precracked p...
متن کاملEffect of Shear Resistance on Flexural Debonding Load-Carrying Capacity of RC Beams Strengthened with Externally Bonded FRP Composites
Debonding failure is the main failure mode in flexurally strengthened reinforced concrete beams by externally bonded or near surface mounted fibre reinforced polymer (FRP) composites. It is believed that FRP debonding will be initiated if the shear stress on the concrete-FRP interface reaches the tensile strength of concrete. However, it was found through experimental and analytical studies tha...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Malaysian Journal of Civil Engineering
سال: 2019
ISSN: 1823-7843
DOI: 10.11113/mjce.v31n1.288