Flexural behaviour of carbon and glass reinforced hybrid composite pipes
نویسندگان
چکیده
This paper presents a study on the flexural behaviour of hybrid composite pipes reinforced with carbon and glass fibres. The progressive failure in three point bending was modelled numerically by Finite Element Analysis (FEA). FEA based model validated against experimental data. With this developed model, effects ply angle, fibre volume fraction hybridisation have been found. It is shown from results that maximum loads occur when angle between 60° 75° pipe has comparable compared to full or pipe.
منابع مشابه
Evaluation of Mechanical and Tribological Properties of Glass/Carbon Fiber Reinforced Polymer Hybrid Composite
Polymer matrix composites used in different industrial applications due to their enhanced mechanical properties and lightweight. However, these materials are subjected to friction and wear situations in some industrial and automobile applications. Therefore, there is a need to investigate the wear properties of polymer matrix composite materials. This article emphasizes the dry abrasive wear be...
متن کاملAnalysis of the Flexural Behaviour of Glass Fiber-Reinforced Plastic
Glass fibre reinforced polymer (GFRP) profiles are finding increasing applications in civil engineering structures, owing to the several advantages they offer over traditional materials. However, due to the combustible nature of their polymer matrix, there are well-founded concerns about their behaviour at elevated temperature and under exposure to fire. These concerns are hindering the widespr...
متن کاملMulti-objective Optimization of Hybrid Carbon/Glass Fiber Reinforced Epoxy Composite Automotive Drive Shaft
In design and fabricate drive shafts with high value of fundamental natural frequency that represented high value of critical speed; using composite materials instead of typical metallic materials could provide longer length shafts with lighter weight. In this paper, multi-objective optimization (MOP) of a composite drive shaft is performed considering three conflicting objectives: fundamental ...
متن کاملHybrid Composite Laminates Reinforced with Kevlar/Carbon/Glass Woven Fabrics for Ballistic Impact Testing
Current study reported a facile method to investigate the effects of stacking sequence layers of hybrid composite materials on ballistic energy absorption by running the ballistic test at the high velocity ballistic impact conditions. The velocity and absorbed energy were accordingly calculated as well. The specimens were fabricated from Kevlar, carbon, and glass woven fabrics and resin and wer...
متن کاملStress-strain Response Modelling of Glass Fibre Reinforced Epoxy Composite Pipes under Multiaxial Loadings
This paper presents the modelling of stress strain response of glass fibre reinforced epoxy (GRE) composite pipes subjected to multiaxial loadings at room temperature (RT). This particular modelling work was developed to predict the non-linear stress strain response caused by the fatigue cyclic and static loading in the multiaxial ultimate elastic wall stress (UEWS) tests by considering the eff...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Composites Part C: Open Access
سال: 2021
ISSN: ['2666-6820']
DOI: https://doi.org/10.1016/j.jcomc.2020.100090