Flexible aqueous lithium-ion batteries with ultrahigh areal capacity and long cycle life
نویسندگان
چکیده
منابع مشابه
Cycle Life Modeling of Lithium-Ion Batteries
A first-principles-based charge-discharge model was developed to simulate the capacity fade of Li-ion batteries. The model is based on the loss of active lithium ions due to solvent reduction reaction and on the rise of the anode film resistance. The effect of parameters such as exchange current density, depth of discharge ~DOD!, end of charge voltage, film resistance, and the overvoltage of pa...
متن کاملBinder-free layered Ti3C2/CNTs nanocomposite anodes with enhanced capacity and long-cycle life for lithium-ion batteries.
A two-dimensional layered Ti3C2/carbon nanotubes (CNTs) hybrid thin film was prepared. Owing to the excellent conductivity of the CNTs, this unique layered structure provides a rapid charge transfer path during the electrochemical reaction, as a lithium ion battery anode, which exhibits higher capacitance and better cycling stability (a reversible capacity of 428.1 mA h g(-1) at 0.5 C after 300...
متن کاملCathodes for Long Cycle Life and High Power Density Lithium Ion Batteries
wileyonlinelibrary.com lower than counterpart anodes. [ 5–7 ] The energy density of current lithium ion batteries is mainly limited by cathode materials. Due to a high theoretical capacity of 1672 mAh g −1 , sulfur has been considered as the next generation cathode for high energy Li-ion batteries, [ 8–12 ] and it has attracted considerable research interest from both academy and industry. Howe...
متن کاملCycle Life of Commercial Lithium-Ion Batteries with Lithium Titanium Oxide Anodes in Electric Vehicles
The lithium titanium oxide (LTO) anode is widely accepted as one of the best anodes for the future lithium ion batteries in electric vehicles (EVs), especially since its cycle life is very long. In this paper, three different commercial LTO cells from different manufacturers were studied in accelerated cycle life tests and their capacity fades were compared. The result indicates that under 55 °...
متن کاملVoltage increase of aqueous lithium-ion batteries by Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic
In this research, a lithium ion conducting lithium aluminum germanium phosphate (LAGP) glass-ceramic with a formula of Li1.5Al0.5Ge1.5(PO4)3 was synthesized by melt-quenching method and subsequent crystallization at 850 °C for 8 h. The prepared glass-ceramic was characterized using X-ray diffraction analysis (XRD) and field emission scanning electron microscopy (FESEM). The XRD patterns exhib...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Today Energy
سال: 2021
ISSN: 2468-6069
DOI: 10.1016/j.mtener.2020.100570