Flatness-based nonlinear control of a three-dimensional gantry crane
نویسندگان
چکیده
منابع مشابه
Flatness Based Control of a Gantry Crane
This contribution deals with flatness based control of a laboratory model of a gantry crane. The mechanical model has 3DOFs, where a trolley can be moved on a rail, the load is fixed at the end of a rope and can be lifted or lowered by coiling or uncoiling this rope on a cylinder. Under the assumption that the rope is always stretched, the underactuated system is not input to state linearisable...
متن کاملDynamic Behaviour of a Nonlinear Gantry Crane System
This paper presents investigations of dynamic behaviour of a nonlinear Gantry Crane System (GCS). The dynamic model is derived using Lagrange equation. Various system parameters of the system are tested to observe the actual behaviour of the dynamic model system. System responses including trolley displacement and payload oscillation are analyzed. Simulation is conducted within Matlab environme...
متن کاملModeling and Nonlinear Control of Gantry Crane Using Feedback Linearization Method
gantry crane system becomes an interesting issue in the field of control technology development. In this paper, dynamic model of gantry crane is extracted using Lagrange method. This model has been linearized and weaknesses of state feedback control of this model is reviewed. To solve these problems, state feedback gain matrix is calculated using LQR method and results are fully investigated. F...
متن کاملModel Predictive Control of Gantry Crane with Input Nonlinearity Compensation
Abstract—This paper proposed a nonlinear model predictive control (MPC) method for the control of gantry crane. One of the main motivations to apply MPC to control gantry crane is based on its ability to handle control constraints for multivariable systems. A pre-compensator is constructed to compensate the input nonlinearity (nonsymmetric dead zone with saturation) by using its inverse functio...
متن کاملFlatness Based Control of a 3-DOF Overhead Crane With Velocity Controlled Drives
As an example of a spatial manipulator with large work space a 3-DOF overhead crane is considered. A nonlinear model of the overhead crane, including drive dynamics, is derived. The drives of trolley and winch are controlled by velocity controllers. Therefore the dynamics of the drives can be approximated and thus included into the model description. The states of the system are parameterized b...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IFAC-PapersOnLine
سال: 2018
ISSN: 2405-8963
DOI: 10.1016/j.ifacol.2018.11.563