Flame retardancy of rigid polyurethane foams containing thermoregulating microcapsules with phosphazene-based monomers

نویسندگان
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effects of silicon surfactant in rigid polyurethane foams

The rigid polyurethane foams (RPUFs) have been fabricated from high functional crude 4,4’-di-phenylmethane diisocyanate (CMDI) and polypropylene glycols (PPGs) for a wide range of surfactant concentration with an environmently friendly blowing agent (HFC 365mfc). Cream time, gel time, and tack-free time increased with the addition of surfactant. Foam density decreased rapidly to a minimum at 0....

متن کامل

Flame Retardancy of Carbon Fibre Reinforced Sorbitol Based Bioepoxy Composites with Phosphorus-Containing Additives

Carbon fibre reinforced flame-retarded bioepoxy composites were prepared from commercially available sorbitol polyglycidyl ether (SPE) cured with cycloaliphatic amine hardener. Samples containing 1, 2, and 3% phosphorus (P) were prepared using additive type flame retardants (FRs) resorcinol bis(diphenyl phosphate) (RDP), ammonium polyphosphate (APP), and their combinations. The fire performance...

متن کامل

Synthesis and Characterization of Multifunctional Two-Component Waterborne Polyurethane Coatings: Fluorescence, Thermostability and Flame Retardancy

Fluorescent and flame-retardant two-component waterborne polyurethane coatings were synthesized using 1,5-dihydroxy naphthalene, a halogen-free polyphosphate and a hydrophilic curing agent, and their properties were systematically characterized. The average particle sizes and zeta potential values were below 170 nm and −30 mV. Meanwhile, the multifunctional two-component waterborne polyurethane...

متن کامل

Polybrominated diphenyl ethers (PBDEs) are manufactured as additive flame retardants in the production of polyurethane foams,

Introduction. Polybrominated diphenyl ethers (PBDEs) are manufactured as additive flame retardants in the production of polyurethane foams, textiles and plastics. PBDEs are persistent, lipophilic compounds that bioaccumulate through to the highest levels of the food chain (e.g., Lindberg et al., 2004). Recent reports have demonstrated that avian populations are subject to PBDE bioaccumulation b...

متن کامل

Aging of Rigid Polyurethane Foams: Thermal Conductivity of N2 and Cyclopentane Gas Mixtures

The thermal conductivity of three mixtures of nitrogen and cyclopentane is measured using a transient hot wire method, at temperatures between 315.14 and 395.89K, and pressures up to 0.53MPa. These mixtures are important in the evaluation of the evolution of the thermal insulation capacity of closed-cell polyurethane foams considering their aging during the respective applications’ total life t...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of Materials Science

سال: 2020

ISSN: 0022-2461,1573-4803

DOI: 10.1007/s10853-020-05389-6