Fire resistance of cold‐formed steel framed shear walls under various fire scenarios
نویسندگان
چکیده
منابع مشابه
non-linear study of various slit shear walls in steel structures
seismic retrofit strategies have been developed in the past few decades following the introduction of new seismic provisions and the availability of advanced materials and methods. it can be observed that new approaches to deal with more lateral forces are more innovative and more energy absorbent. in line with this, there is a growing trend toward the use of steel shear walls as a system with ...
15 صفحه اولBehavior of Steel-Sheathed Shear Walls Subjected to Seismic and Fire Loads.
A series of tests was conducted on six 2.7 m × 3.7 m shear wall specimens consisting of cold-formed steel framing sheathed on one side with sheet steel adhered to gypsum board and on the opposite side with plain gypsum board. The specimens were subjected to various sequences of simulated seismic shear deformation and fire exposure to study the influence of multi-hazard interactions on the later...
متن کاملDesign considerations for fire resistance of lightweight-framed assemblies
The effects of a number of design parameters have been investigated including the types of cavity insulation, resilient channels, gypsum board thickness, the number of gypsum board layers, stud arrangements, and type of framing. The results have shown that the main factors that affected the performance of stud wall assemblies were the type of insulation and the number of gypsum board layers. In...
متن کاملComputation of Structural Fire Resistance of Steel Sections
The main object of this study is to compute the structural fire resistance for several steel members under different loading conditions. This is done in chapter 4 using two advanced calculation models. Chapter 1 contains prescriptions according to European codes, needed for this research. In Chapter 2 the notion of structural fire resistance is explained and also information about the types of ...
متن کاملStainless steel structures in fire
The initial material cost of structural stainless steel is about four times that of structural carbon steel, due largely to the expense of the alloying elements and the relatively low volume of production. Given broadly similar structural performance, additional areas of benefit need to be identified and exploited in order to establish stainless steel as a viable alternative material for constr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Fire and Materials
سال: 2019
ISSN: 0308-0501,1099-1018
DOI: 10.1002/fam.2744