Finite Element Structural Simulation of Connecting Rod
نویسندگان
چکیده
Abstract As an important bearing structure of maglev train, the connecting rod has high requirements for material performance. In this paper, according to structural capacity rod, finite element methodwas used calculate and analyze composite aluminum alloy under two working conditions, so as determine advantages in mechanical properties provide theoretical support design rod.
منابع مشابه
Finite Element Analysis of Connecting Rod
Abstract—The connecting rod transmits the piston load to the crank causing the latter to turn, thus converting the reciprocating motion of the piston into a rotary motion of the crankshaft. Connecting rods are subjected to forces generated by mass and fuel combustion. This study investigates and compares the fatigue behavior of forged steel, powder forged and ASTM a 514 steel cold quenched conn...
متن کاملStudy and Simulation of Shot peening Effect on Fatigue Life of a Powder Forged Connecting rod
Shot peening applies a residual compressive stress field (RCSF) on the surface of parts. It also shifts “crack nucleation sites” to sub-surface locations. A nondestructive method of measuring the stresses, Sin2ψ was utilized here and the stress values introduced to Ansys software. For this purpose, uniform stress in all directions was applied on the con rod. Loading on the rod in Ansys had thre...
متن کاملPreform Shape Optimization of Connecting Rod Using Finite Element Method and Taguchi Method
Preform design in forging processes is an important aspect for improving the forging quality and decreasing the production cost. The objective of this paper is to obtain an optimal perform shape in the consideration of the influence of the metal flow deformation in closed die forging process. Finite element method based DEFORMTM 3D software in conjunction with Taguchi method has been used to si...
متن کاملProcess-based tolerance assessment of connecting rod machining process
Process tolerancing based on the process capability studies is the optimistic and pragmatic approach of determining the manufacturing process tolerances. On adopting the define–measure–analyze–improve–control approach, the process potential capability index (C p) and the process performance capability index (C pk) values of identified process characteristics of connecting rod ...
متن کاملFinite Element Simulation of Welding Distortion in Large Structure
Fusion welding is widely used in heavy industries to join different parts together. But sometimes welding-induced distortions cause problems like misalignment during assembling and make costs to remove them. Thus it is imperative to predict and mitigate them to improve weldments quality and also reduce in fabrication costs. This study at first will introduce inherent deformation method for pred...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of physics
سال: 2023
ISSN: ['0022-3700', '1747-3721', '0368-3508', '1747-3713']
DOI: https://doi.org/10.1088/1742-6596/2468/1/012068