Finite element simulation of X20CrMoV121 steel billet forging process using the Deform 3D software
نویسندگان
چکیده
منابع مشابه
Finite Element Simulation of a Friction Drilling process using Deform-3D
Friction drilling Process is a rotating conical tool to penetrate the work piece and create a bushing in a single step without generating chips. This work investigates the finite element modeling (FEM) of large plastic strain and high-temperature work-material deformation in friction drilling. The workmaterial deformation is very large, and both the tool and work piece temperatures are high in ...
متن کاملSimulation of effective parameters on low-carbon steel laser welding process using finite element method
In this paper, laser beam welding of a rectangular piece of steel was simulated using Fluent software. Physical properties of analytical field was constant and its changes with temperature was ignored. In the present work, effect of tool speed and laser power on temperature distribution of workpiece surface and different deeps in the plane of symmetry and also maximum of temperature and depth o...
متن کاملSimulation of effective parameters on low-carbon steel laser welding process using finite element method
In this paper, laser beam welding of a rectangular piece of steel was simulated using Fluent software. Physical properties of analytical field was constant and its changes with temperature was ignored. In the present work, effect of tool speed and laser power on temperature distribution of workpiece surface and different deeps in the plane of symmetry and also maximum of temperature and depth o...
متن کاملSimulation of a Microgripper with Electrothermal Actuator Using COMSOL Software Based on the Finite Element Method
Micro-electro-mechanical systems (MEMs) are Combination of electrical and mechanical components in Micron dimensions. In recent years, holding, actuating methods and handling of MEMs components such as microgripper, microsensors and etc. have been deeply studied. Microgrippers for handling, positioning and assembling of micro components are very useful so that for clamping need actuation create...
متن کاملSimulation of a Microgripper with Electrothermal Actuator Using COMSOL Software Based on the Finite Element Method
Micro-electro-mechanical systems (MEMs) are Combination of electrical and mechanical components in Micron dimensions. In recent years, holding, actuating methods and handling of MEMs components such as microgripper, microsensors and etc. have been deeply studied. Microgrippers for handling, positioning and assembling of micro components are very useful so that for clamping need actuation create...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: SN Applied Sciences
سال: 2019
ISSN: 2523-3963,2523-3971
DOI: 10.1007/s42452-019-1087-y