Finite element simulation of the braiding process
نویسندگان
چکیده
منابع مشابه
Finite Element Simulation of Dental Implantation Process
Using the finite element procedure, the insertion process of a dental implant into a section of the mandible is analysed. Elevated stress concentrations in both cancellous and cortical bone are examined during implantation. An implant of length 11mm is inserted at 1mm increments into the mandible. The torque applied to the implant top ranges from 0 to 450Nmm for a total time period of 36 second...
متن کاملFinite Element Simulation of Hydrostatic Extrusion Process to Produce Thin Bimetallic Parts
The hydrostatic extrusion is a new method of extrusion process. The most important advantage of this method is reduction of friction and close tolerance for the coating thickness. In this study, the hydrostatic extrusion simulation of bimetallic wires has performed using of finite element method. In the following the advantages of hydrostatic extrusion compared to the direct extrusion are prese...
متن کاملSIMULATION OF NICKEL ELECTROFORMING PROCESS OF A REVOLVING PART USING FINITE ELEMENT METHOD
n this paper a finite element model has been proposed for evaluation of primary and secondary current density values on the cathode surface in nickel electroplating operation of a revolving part. In addition, the capability of presented electroplating simulation has been investigated in order to describe the electroplated thickness of the nickel sulfate solution. Nickel electroplating experi...
متن کاملSimulation of Quenching Process Using the Finite Element Method
This contribution is concerned with modeling and simulation of quenching employing the finite element method. An anisothermal constitutive model formulated within the framework of continuum mechanics and the thermodynamics of irreversible processes is considered adopting two phases: austenite and martensite. A numerical procedure is developed based on operator split technique associated with an...
متن کاملChip Formation Process using Finite Element Simulation “Influence of Cutting Speed Variation”
The main aim of this paper is to study the material removal phenomenon using the finite element method (FEM) analysis for orthogonal cutting, and the impact of cutting speed variation on the chip formation, stress and plastic deformation. We have explored different constitutive models describing the tool-workpiece interaction. The Johnson-Cook constitutive model with damage initiation and damag...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Mechanics of Advanced Materials and Modern Processes
سال: 2019
ISSN: 2198-7874
DOI: 10.1186/s40759-019-0041-4