Finite Element Simulation of Powder Compaction via Shock Consolidation Using Gas-gun System
نویسندگان
چکیده
منابع مشابه
An Arbitrary Lagrangian-eulerian Finite Element Method for Cone-cap Plasticity; Application to Powder Compaction Simulation
The compaction forming of metal powder is a process involving large deformations, large strain, non-linear material behavior and friction. Consequently, the numerical analysis of such a highly non-linear process is a formidable computational problem. In this paper, an ALE technique is presented based on a generalized cap plasticity model in simulation of powder forming processes. In ALE formula...
متن کاملStudy and simulation of the effective factors on soil compaction by tractors wheels using the finite element method
Soil is a nonrenewable source that needs considerable management to prevent physical deteriorationby erosion and compaction. Compacted soil causes low fertility and yield. The purpose of this study isto investigate the effect of viscoelastic properties of soil and to determine important factors oncompaction. Furthermore, stress distribution, prediction of soil compaction and simulation of its e...
متن کاملAnalysis of Roll Wear in Reshaping Using Finite Element Simulation
Reshaping process is a widely used method for producing tubes with non-circular cross sections. Owing to the friction between pipe and rolls, initial round pipe moves forward and consequently, it gradually formed into square or rectangular one. In practice, geometric profile of the rolls will be changed after a while. These changes would be detrimental the production of faultless products. Ther...
متن کاملNumerical simulation of powder flow by Finite Element methods
In contrast to most fluids, flowing powders do not exhibit viscosity such that a Newtonian rheology cannot accurately describe granular flow. Assuming that the material is incompressible, dry, cohesionless, and perfectly rigid-plastic, generalized Navier-Stokes equations (’Schaeffer Model’) have been derived where the velocity gradient has been replaced by the shear rate, and the viscosity depe...
متن کاملFinite Element Methods for the Simulation of Incompressible Powder Flow
Abstract. The flowing of powders brings a new challenging and interesting problem to the CFD community: at very high concentrations and low rate-of-strain, grains are in permanent contact, rolling on each other. Therefore a frictional stress model must be taken into account. This can be done using plasticity and similar theories in which the granular material behaviour is assumed to be independ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Engineering
سال: 2014
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2014.10.094