Finite Element Simulation of Multi-gripper Flexible Stretch Forming
نویسندگان
چکیده
منابع مشابه
Finite element simulation of two-point incremental forming of free-form parts
Two-point incremental forming method is considered a modern technique for manufacturing shell parts. The presence of bottom punch during the process makes this technique far more complex than its conventional counterpart i.e. single-point incremental forming method. Thus, the numerical simulation of this method is an essential task, which leads to the reduction of trial/error costs, predicts th...
متن کاملFinite Element Simulation of Shot Peening and Stress Peen Forming
Shot peening is widely used to improve fatigue life of the metal component. It can also induce the distortion of thin component, which is called peen forming and is widely used for shaping aircraft wing skin. Shot peening surface coverage, intensity and saturation are important shot peening control parameters and have greatly influence on shot peening and peen forming results. Due to the insuff...
متن کاملApplication of Finite Element Simulation in Metal Forming Tribology
The impact of numerical methods, particularly, the Finite Element Method (FEM), in providing tribological information relevant for lubricant formulations and general study of tribological variables is discussed. FEA was used to study surface evolution at the tool-workpiece interface for tube hydroforming and forging processes. The study has demonstrated that material properties, geometric compl...
متن کاملFinite Element Simulation of Welding Distortion in Large Structure
Fusion welding is widely used in heavy industries to join different parts together. But sometimes welding-induced distortions cause problems like misalignment during assembling and make costs to remove them. Thus it is imperative to predict and mitigate them to improve weldments quality and also reduce in fabrication costs. This study at first will introduce inherent deformation method for pred...
متن کاملAnalysis of Roll Wear in Reshaping Using Finite Element Simulation
Reshaping process is a widely used method for producing tubes with non-circular cross sections. Owing to the friction between pipe and rolls, initial round pipe moves forward and consequently, it gradually formed into square or rectangular one. In practice, geometric profile of the rolls will be changed after a while. These changes would be detrimental the production of faultless products. Ther...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Engineering
سال: 2014
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2014.10.348