Finite Element Simulation of Fracture Toughness of Al6061 Reinforced with Silicon Carbide
نویسندگان
چکیده
منابع مشابه
Microstructure and Fracture Toughness of Hot-Pressed Silicon Carbide Reinforced with Silicon Carbide Whisker
The effects of p-Sic whisker addition on the microstructural evolution and fracture toughness (K,c) of hot-pressed SIC were investigated. Most of the whiskers added disappeared during the densification process by transformation into the a-phase. The remaining whiskers acted as nuclei for grain growth, resulting in the formation of large tabular grains around the whiskers. The tabular grains aro...
متن کاملEffect of Thickness on Fracture Toughness of Al6061-Graphite
This research work presents the study on fracture behavior of Al6061 with graphite particulate composite produced by the stir casting technique. The materials selected for the proposed work is Al6061 and graphite particles. Compact tension (CT) specimens were utilized to determine fracture toughness for different thickness of composite. In the present work, optimizing the parameters of the comp...
متن کاملFinite Element Modeling of the Vibrational Behavior of Single-Walled Silicon Carbide Nanotube/Polymer Nanocomposites
The multi-scale finite element method is used to study the vibrational characteristics of polymer matrix reinforced by single-walled silicon carbide nanotubes. For this purpose, the nanoscale finite element method is employed to simulate the nanotubes at the nanoscale. While, the polymer is considered as a continuum at the larger scale. The polymer nanotube interphase is simulated by spring ele...
متن کاملFracture Toughness of Cellular Solids using Finite Element Based Micromechanics
Micromechanical methods to predict the fracture behavior and estimate the fracture toughness of cellular solids and foams are presented in this paper. The microstructure of the foam is modeled using finite elements. The struts of foam are modeled using either structural elements such as beams or three-dimensional solid elements. A portion of the foam containing an edge crack is modeled. Displac...
متن کاملCarbide Structure and Fracture Toughness of High Speed Tool Steels
In the present study, M2 high speed steels were fabricated by using electro-slag rapid remelting process. Carbide structure was analysed and the fracture toughness and hardness were also measured after austenitization treatment at 1190 and 1210C followed by tempering treatment at 535C for billets with various diameters from 16 to 60 mm. Electro-slag rapid remelting (ESRR) process is an advanced...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2021
ISSN: 1757-8981,1757-899X
DOI: 10.1088/1757-899x/1065/1/012036