Finite Element Simulation of Ball Joint under Hot Forging Process
نویسندگان
چکیده
منابع مشابه
Simulation Of Phase Transformation In Hot Forging Dies During A Precision Forging Process By Means Of Finite- Element-Analysis
The Finite-Element-Analysis (FEA) is of major importance for the design and improvement of forging processes. In this field, FEA is traditionally used to predict die fill, residual stresses and forming forces. The intention of the work presented in this paper is the development of an advanced simulation model for the description of phase transformation processes in forging dies based on FEA. Th...
متن کاملfinite element simulation of c.v. joint forging of prid using arbitrary lagrangian-eulerian method
one of the most important parts of power transmission in automotives is c.v. joint, which consists of four components where exterior bowl is one of them. due to its complexity, and importance in automobile and existence of high stresses, forging process is the only cost effective method of production. hence, the best method of production of this part is forging process. the exterior part of c.v...
متن کاملFinite Element Analysis of Ball-Joint Boots under Environmental and Endurance Tests
Ball joints support and guide certain automotive parts that move relative to the frame of the vehicle. Such ball joints are covered and protected from dust, mud, and other interfering materials by ball-joint boots made of rubber—a flexible and nearincompressible material. The boots may experience twisting and bending deformations because of the motion of the joint arm. Thus, environmental and e...
متن کاملFinite Element Simulation of Dental Implantation Process
Using the finite element procedure, the insertion process of a dental implant into a section of the mandible is analysed. Elevated stress concentrations in both cancellous and cortical bone are examined during implantation. An implant of length 11mm is inserted at 1mm increments into the mandible. The torque applied to the implant top ranges from 0 to 450Nmm for a total time period of 36 second...
متن کاملFinite Element Simulation of Hydrostatic Extrusion Process to Produce Thin Bimetallic Parts
The hydrostatic extrusion is a new method of extrusion process. The most important advantage of this method is reduction of friction and close tolerance for the coating thickness. In this study, the hydrostatic extrusion simulation of bimetallic wires has performed using of finite element method. In the following the advantages of hydrostatic extrusion compared to the direct extrusion are prese...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Physics: Conference Series
سال: 2020
ISSN: 1742-6588,1742-6596
DOI: 10.1088/1742-6596/1510/1/012013