FINITE ELEMENT SIMULATION OF A PASSIVE MAGNETIC ROBOTIC SYSTEM
نویسندگان
چکیده
منابع مشابه
Finite element simulation of a passive magnetic robotic System
To realize the stability of the passive magnetic robotic system, a novel combination of permanent magnets is proposed. As we know, a single passive magnetic levitation is impossible to suspend all degrees of freedom of a rigid body; this article researches the combination of multiple passive magnetic bearings by the finite element method (FEM) simulation. Through changing the magnetization dire...
متن کاملFinite element simulation of microphotonic lasing system.
We present a method for performing time domain simulations of a microphotonic system containing a four level gain medium based on the finite element method. This method includes an approximation that involves expanding the pump and probe electromagnetic fields around their respective carrier frequencies, providing a dramatic speedup of the time evolution. Finally, we present a two dimensional e...
متن کاملFinite Element Simulation of Welding Distortion in Large Structure
Fusion welding is widely used in heavy industries to join different parts together. But sometimes welding-induced distortions cause problems like misalignment during assembling and make costs to remove them. Thus it is imperative to predict and mitigate them to improve weldments quality and also reduce in fabrication costs. This study at first will introduce inherent deformation method for pred...
متن کاملFinite Element Simulation of a Magnetic Brake with a Soft Magnetic Solid Iron Rotor
A rotational magnetic brake with a solid iron rotor is excited by a DC current (Fig. 1). The magnetic properties of the rotor are highly nonlinear. Currents are induced in the moving conductive rotor. The magnetic flux is swept along in the direction of the rotation (Fig. 2). The oscillations appearing in the finite element solutions at high speeds (Fig. 3), have a non-physical nature and are r...
متن کاملAnalysis of Roll Wear in Reshaping Using Finite Element Simulation
Reshaping process is a widely used method for producing tubes with non-circular cross sections. Owing to the friction between pipe and rolls, initial round pipe moves forward and consequently, it gradually formed into square or rectangular one. In practice, geometric profile of the rolls will be changed after a while. These changes would be detrimental the production of faultless products. Ther...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Robotics and Automation
سال: 2017
ISSN: 1925-7090
DOI: 10.2316/journal.206.2017.1.206-4889