Finite Element Modelling of the Residual Stresses Induced in Thermally Deposited Coatings
نویسندگان
چکیده
منابع مشابه
Experimental and Numerical Study of Residual Stress in the WC-12Co HVOF Sprayed Coatings
Thermally sprayed coatings are intrinsically associated with residual stresses in the deposits. These stresses are varied in nature and magnitude, and have a pronounced effect on the mechanical behavior of the system. In the current study, WC-12Co coatings were deposited using HVOF thermal spraying. The sin2ψ method was used to evaluate the through thickness residual stress by means ...
متن کاملD finite element modeling of the thermally induced residual stress in the hybrid aser/arc welding of lap joint
In this study, a three-dimensional (3D)finite elementmodel is developed to investigate thermally induced stress field during hybrid laser–gas tungsten arc welding (GTAW) process. In the hybridwelding case, we focus on the GTAWprocess sharing commonmolten poolwith laser beam and playing an augment role in thehybridweldingsystem.Anexperiment-based thermalanalysis isperformedtoobtain the temperatu...
متن کاملResidual Stresses in Thermally Sprayed Gas Turbine Components
In this paper, the residual stress of thermal spray coatings in gas turbine component by curvature method has been studied. The samples and shaft were coated by hard WC-12Co cermets using high velocity oxy fuel (HVOF) after preparation in same conditions. The curvature of coated samples was measured by using of coordinate measurement machine (CMM). The metallurgical and Tribological studies has...
متن کاملThermally Induced Stresses in Glazing Systems
A thorough examination has been performed of the thermally induced stresses on a window in an enclosure-fire environment. Analytical and numerical methods establish the importance of bridling stress (due to axial elongation) and flexing stress (due to normal deformation). Most previous studies omitted the consideration of flexing stresses. Maximum stresses, being the sum of bridling and flexing...
متن کاملFinite Element Analysis of Cooling Time and Residual Strains in Cold Spray Deposited Titanium Particles
In this article, using finite element analysis (FEA) and an X-ray diffractometer (XRD), cold-sprayed titanium particles on a steel substrate is investigated in term of cooling time and the development of residual strains. Three cooling-down models of sprayed particles after deposition stage are simulated and discussed: the first model (m1) considers conduction effect to the substrate only, the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Archives of Metallurgy and Materials
سال: 2014
ISSN: 2300-1909
DOI: 10.2478/amm-2014-0098