Finite element modeling of nano-indentation technique to characterize thin film coatings
نویسندگان
چکیده
منابع مشابه
Transverse fracture in thin-film coatings under spherical indentation
The competition between transverse surface and sub-surface cracks in a thin, hard coating bonded to polycarbonate substrate due to spherical indentation is investigated in real-time as a function of coating thickness and indenter radius. Fine grain (Y-TZP) and medium grain (alumina) ceramics and pre-abraded amorphous glass are used for the coating. As the coating thickness is reduced, the famil...
متن کاملStudies on Nano-indentation of Polymeric Thin Films Using Finite Element Methods
In this paper, the numerical simulation for nano-indentation is performed to measure time-dependent behavior of polymeric films. The possibility to extract the relaxed shear modulus of the polymer is evaluated using a rigid ball indenter. The viscoelastic behavior of the polymer was represented by the standard model. The effects of Poisson’s ratio are also discussed.
متن کاملEvaluation of Coating Performance by Nano Indentation Technique and Its Validation by Finite Element Approach
To improve the surface properties of a substrate coating plays an important role. The performance of the coating layer over the substrate can be known under different load conditions. Finite element simulation is one of the techniques to validate the result where the improvement of the coating is done by optimization. Through FEM, very complex stress strain field of thin films or bulk material ...
متن کاملExperimental and Finite Element Simulation of Nano-indentation on Metal Matrix Composites: Hardness Prediction
The scientific importance of nanocomposites are being increased due to their improvedproperties. This paper is divided into two parts. First, Al-Al2O3 nanocomposite wasproduced by using ball milling technique followed by cold compaction and sintering.Microstructure and morphology studies were done through SEM, TEM, and EDX anal-ysis on the produced powder. The mechanical properties of the produ...
متن کاملFinite element modeling of polymer matrix nano-composites reinforced by nano-cylindrical fillers
A new three-dimensional unit cell model has been developed for modeling three constituent phases including inclusion, interphase and matrix. The total elastic modulus of nano-composite is evaluated. Numerical results are in good agreement with the previous proposed theoretical modeling. Higher matrix and inclusion elastic modulus both can dramatically influence the total elastic modulus.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of King Saud University - Engineering Sciences
سال: 2019
ISSN: 1018-3639
DOI: 10.1016/j.jksues.2017.02.001