Finite Element Modeling of Bottom Hole Assembly Stress-strain State
نویسندگان
چکیده
منابع مشابه
Finite Element Modeling of Strain Rate and Grain Size Dependency in Nanocrystalline Materials
Nanocrystalline materials show a higher strain-rate sensitivity in contrast to the conventional coarse-grained materials and a different grain size dependency. To explain these phenomenon, a finite element model is constructed that considers both grain interior and grain boundary deformation of nanocrystalline materials. The model consist of several crystalline cores with different orientations...
متن کاملCorrecting the stress-strain curve in hot compression test using finite element analysis and Taguchi method
In the hot compression test friction has a detrimental influence on the flow stress through the process and therefore, correcting the deformation curve for real behavior is very important for both researchers and engineers. In this study, a series of compression tests were simulated using Abaqus software. In this study, it has been employed the Taguchi method to design experiments by the factor...
متن کاملDrilling Trajectory Prediction Model for Push-the-bit Rotary Steerable Bottom Hole Assembly
The study of rotary steering drilling technology is currently one of the hot topics in the drilling engineering field. It requires accurate well trajectory control instructions when rotary steerable tools are applied to achieve the well trajectory control goal. A drilling trajectory prediction model will benefit this progress. According to the continuous beam theory, a mechanical model of push-...
متن کاملFinite element modeling of the human head under baton impact
Purpose: This research will try to predict damage probability and calculate the main stress resulted from baton impacts by finite element (FE) modeling of the human head considering skull texture, brain and cerebrospinal fluid.Materials and Methods: A three dimensional FE model of the skull-brain complex was constructed for simulating the baton impact. The FE analysis was carried out using ANSY...
متن کاملReprint: Finite Element Modeling of Vibration Stress Relief after Welding
A finite element model was developed to simulate the vibratory stress relief after welding. Both resonant and nonresonant vibrations can relieve residual stresses in welded structures by creating plastic deformation around the weld area. For the non-resonant vibration, the stress reduction strongly depends on the vibration amplitude. For the resonant vibration, the vibration frequency is the ke...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Mechanical Engineering and Robotics Research
سال: 2020
ISSN: 2278-0149
DOI: 10.18178/ijmerr.9.6.803-807