Finite Element Analysis on Roller-straightening Process of Equal Leg Angles
نویسندگان
چکیده
منابع مشابه
Optimization of a Roller Levelling Process for Al7001t9 Pipes with Finite Element Analysis and Taguchi Method
This paper is concerned with optimization of process parameters for a roller leveller that is an indispensable equipment to eliminate the undesirable curvature of a thin-walled aluminum pipe. Optimization of process parameters has been carried out for a multistaggered-type 14-roller leveller. A finite element model of a multi-staggered 14-roller leveller was constructed for analysis whose resul...
متن کاملFinite Element Analysis of Crack Welding Process
The numerical simulation of the crack welding process is reported in this paper. The thermo-electro-structural coupled-field finite element analysis is adopted to investigate the welding process of crack surfaces. In the simulation, the pressure-dependent and temperature-dependent electrical contact conditions are considered. From the results, the crack surfaces can melt and weld together under...
متن کامل3D finite element study of temperature variations during equal channel angular pressing
Equal channel angular pressing is the most promising method of severe plastic deformation with the capability of producing ultrafine grained materials. These materials exhibit improved mechanical and physical properties compared with their coarse grained counter parts.The temperature variation in the sample during ECA-pressing is a key factor determining the final microstructure and mechanical ...
متن کاملFinite Element Analysis and Design Improvement of Film Picking Forks Roller Tooth in Field Cleaning Machine
In this paper the mechanical analysis of the film picking forks roller tooth in field -cleaning machine was done. A finite element analysis model was built and used by the non-linear finite element analysis method. It is obtained from the result of post-processing calculation and analysis that according to the Fourth Strength Theory, the maximum equivalent stress on the pole tooth root under th...
متن کاملAnalytical and Finite Element Analysis of Hydroforming Deep Drawing Process
This paper gives an overview of a deep drawing process by pressurized liquid medium separated from the sheet by a rubber diaphragm. Hydroforming deep drawing processing of sheet metal parts provides a number of advantages over conventional techniques. It generally increases the depth to diameter ratio possible in cup drawing and minimizes the thickness variation of the drawn cup. To explore the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 2009
ISSN: 1883-2954,0021-1575
DOI: 10.2355/tetsutohagane.95.773