FINITE ELEMENT ANALYSIS OF THERMAL STRESSES IN A PAD-DISC BRAKE SYSTEM (A REVIEW)
نویسندگان
چکیده
منابع مشابه
Simulation of Thermal Stresses in a Brake Disc
In this thesis thermal stresses in a brake disc during a braking operation are simulated. The simulations are performed by using a sequential approach where the temperature history generated during a frictional heat analysis is used as an input for the stress analysis. The frictional heat analysis is based on the Eulerian method, which requires significantly lower computational time as compared...
متن کاملFinite Element Analysis Of Disc Brake By ANSYS Workbench
The brakes must be strong enough to stop the vehicle within a minimum distance in an emergency. The driver must have proper control over the vehicle during emergency braking and vehicle must not skid. The brakes must have good antedate characteristics their effectiveness should not decrease with prolonged application and thus it demand that the cooling of the brakes should be very efficient. Fo...
متن کاملfinite element analysis of automotive disk brake and pad in frictional model contact
the object of this work is to present a study of the thermomechanical behavior of the automobile disc brake for the prediction of their resistance to fatigue. then, a study of purely mechanical dry contact between the disc and pads is developed with a good prediction becomes a major stake for the industrialists while modeling the loading and the boundary conditions around the disc.we used the s...
متن کاملa swot analysis of the english program of a bilingual school in iran
با توجه به جایگاه زبان انگلیسی به عنوان زبانی بین المللی و با در نظر گرفتن این واقعیت که دولت ها و مسئولان آموزش و پرورش در سراسر جهان در حال حاضر احساس نیاز به ایجاد موقعیتی برای کودکان جهت یاد گیری زبان انگلیسی درسنین پایین در مدارس دو زبانه می کنند، تحقیق حاضر با استفاده از مدل swot (قوت ها، ضعف ها، فرصتها و تهدیدها) سعی در ارزیابی مدرسه ای دو زبانه در ایران را دارد. جهت انجام این تحقیق در م...
15 صفحه اولFinite-element analysis of thermal expansion and thermal mismatch stresses in a Cu–60vol%ZrW2O8 composite
Thermal mismatch stresses in the ceramic particles of a Cu–ZrW2O8 composite were calculated using a finite-element model, and found to be high enough to trigger a pressure-induced phase transformation, in agreement with previous measurements by X-ray diffraction. The calculated thermal expansion/contraction curves also agree with previous experimental dilatometric results. 2004 Elsevier Ltd. Al...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Mechanica et Automatica
سال: 2013
ISSN: 2300-5319
DOI: 10.2478/ama-2013-0032