Finite Element Analysis of the Axially Non-symmetrical Piercing Punches Performance for Belt Perforation

نویسندگان

چکیده

Modification of the punch geometry can greatly reduce force necessary to perform perforation belt. This paper presents research on axially non-symmetrical piercing punches – double sheared one and with a cylindrical bowl. FEM analysis was performed for variable tip angle β in 60-150° range or bowl radius R 5.25-10 mm constant diameter D = 10 TFL10S Based obtained results, influence (for punch) FP pneumatic cylinder stroke increase Δ s determined. used obtain function displacement characteristics various tool geometry. geometrical parameters were Additionally, their application punching die design process, where effective features tools are desired, is presented.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Non Linear Finite Element Analysis of Reinforced and Unreinforeced Pavements

In this research a comprehensive finite element program was developed in order to carry out an elasto perfectly plastic analysis of geogrid reinforcement of a model pavement. Qualitative agreement is seen between the numerical results and experiment. The results indicate the influence of geogrid in reduction of vertical deformation of pavements. It is also seen that for strong subgrade, the opt...

متن کامل

The Performance of an Hexahedron C* Element in Finite Element Analysis

The performance of an 8-noded hexahedron C1* element in elasticity is investigated. Three translational displacements and their derivatives as strain in each direction are considered as degrees of freedom (d.o.f.’s) at each node. The geometric mapping is enforced using a C0 element with no derivative as nodal d.o.f.’s . The stiffness matrix of the element is also computed using a transformation...

متن کامل

Finite Element Analysis of Permanent Magnet Synchronous Motors Subjected to Symmetrical Voltage Sags

This paper studies the effects of symmetrical voltage sags on the operational characteristics of a Permanent Magnet Synchronous Motor (PMSM) by Finite Element Method (FEM). Voltage sags may cause high torque pulsations which can damage the shaft or equipment connected to the motor. By recognizing the critical voltage sags, sags that produce hazardous torque variations could be prevented. Simula...

متن کامل

Geometrically nonlinear analysis of axially functionally graded beams by using finite element method

The aim of this paper is to investigate geometrically nonlinear static analysis of axially functionally graded cantilever beam subjected to transversal non follower load. The considered problem is solved by finite element method with total Lagrangian kinematic approach. The material properties of the beam vary along the longitudinal direction according to the power law function. The finite elem...

متن کامل

Analysis of Axisymmetric and Non-Axisymmetric Stretching of Sheet Metals by the Finite Element Method

Stretching process of sheet metals in both cases of axisymmetric and non-axisymmetric is analyzed. A rigid-plastic, normal anisotrop material is assumed and large strain formulation is applied. Triangular elements are used and stiffness equations of elements are obtained from virtual work principle. These nonlinear equations are linearized by Newton-Raphson's method and are solved by Gaussian e...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: MATEC web of conferences

سال: 2022

ISSN: ['2261-236X', '2274-7214']

DOI: https://doi.org/10.1051/matecconf/202235702001