FINITE ELEMENT ANALYSIS OF STATIC WING BOX TEST RIG

Finite Element Analysis of Different Hip Implant Designs along with Femur under Static Loading Conditions

Background: The hip joint is the largest joint after the knee, which gives stability to the whole human structure. The hip joint consists of a femoral head which articulates with the acetabulum. Due to age and wear between the joints, these joints need to be replaced with implants which can function just as a natural joint. Since the early 19th century, the hip joint arthroplasty has evolved, a...

Thermal and Static Finite Element Analysis of Fixed Scroll Deformation

Correcting the stress-strain curve in hot compression test using finite element analysis and Taguchi method

In the hot compression test friction has a detrimental influence on the flow stress through the process and therefore, correcting the deformation curve for real behavior is very important for both researchers and engineers. In this study, a series of compression tests were simulated using Abaqus software. In this study, it has been employed the Taguchi method to design experiments by the factor...

static analysis of sandwich constructions with use of finite element method

static analysis of sandwich constructions subjected to pressure and concentrated loads with the use of finite element method has been discussed in this paper. because of difficulties involved in analytical solution for most of the practical problems. an efficient computer programs has been developed that can be executed on a pc/xt computer and solves complicated problems easily and economically...

Finite Element Analysis Of The Precracked Line Scratch Test

In MEMS packages and silicon devices, the adhesion of interconnects to the substrate is a critical reliability issue. A Precracked Line Scratch Test (PLST) is among one of the available tests to measure the thin line adhesion. In the test, an initial crack is introduced at the interface between the thin line and the substrate. The line is then loaded from the precracked end. The load is recorde...