FINITE ELEMENT ANALYSIS OF REINFORCED CONCRETE WALLS SUBJECTED TO REVERSED CYCLIC AND DYNAMIC LOADS

Reinforced Concrete Bridge Piers Subjected to Reversed Cyclic Loading

Sixteen large-scale reinforced concrete specimens without web reinforcements were tested to study the behavior of typical bridge piers subjected to deflection reversals that were large enough to cause extensive yielding of the longitudinal reinforcement. The different parameters considered included shear spanto-depth ratio, percentage of longitudinal reinforcement, frequency of the applied load...

Experiments and Simulation of Reinforced Concrete Buildings Subjected to Reversed Cyclic Loading and Shake Table Excitation

An integrated experiment and analysis research program is proposed to address the complex behavior of reinforced concrete buildings subjected to multi-directional earthquake loading and the subsequent interactions resulting from the nonlinear response of individual components that compound further the multi-directional affect of the ground motion. Results will impact a broad community ranging f...

Performance of Polymer-encased Concrete Walls Subjected to Blast Loads

Shear and Flexural Stiffnesses of Reinforced Concrete Shear Walls Subjected to Cyclic Loading

Seismic analyses of concrete structures under maximum-considered earthquakes require the use of reduced stiffness accounting for cracks and degraded materials. Structural walls, different to other flexural dominated components, are sensitive to both shear and flexural stiffness degradations. Adoption of the gross shear stiffness for walls in seismic analysis prevails particularly for the design...

investigation on diagonal reinforced concrete shear walls behavior under cyclic lateral load using finite element method

buildings with wall or frame-wall systems are more effective against earthquake forces and sustain less damage than buildings which their lateral resistance is solely depends on frames. four reinforced concrete (rc) structural wall specimens were subjected to cyclic loading using finite elements method with abaqus software in order to study influence of diagonal web reinforcement. the research ...