Finite Element Analysis of Reinforced Concrete Interior Beam Column Connection Subjected to Lateral Loading
نویسندگان
چکیده
منابع مشابه
Finite element analysis of a rigid beam to column connection reinforced with channels
Abstract: This research work presents a new rigid connection constructed with channels. In order to assess its hysteresis behavior, three specimens with different cover plates and six specimens with different panel zone thickness have been considered. The energy absorbed by the connection and the behavior of the panel zone were studied during cyclic loading and compared with those of connectio...
متن کاملFinite Element Analysis of Reinforced Concrete Column Under Lateral Load
To serve its purpose a structure must be safe against collapse and serviceable in use. Serviceability requires that deflections be adequately small to keep the cracks within tolerable limits. Although the widely followed ACI Code suggests a detailed method of deflection calculation, it often cannot exactly perceive the actual behavior of a structure. For this purpose, finite element analysis, u...
متن کاملFinite Element Modeling of GFRP-Reinforced Concrete Interior Slab-Column Connections Subjected to Moment Transfer
A finite element model (FEM) was constructed using specialized three-dimensional (3D) software to investigate the punching shear behavior of interior slab-column connections subjected to a moment-to-shear ratio of 0.15 m. The FEM was then verified against the experimental results of full-scale interior slab-column connections reinforced with glass fiber reinforcement polymer (GFRP) bars previou...
متن کاملReinforced Concrete Bridge Piers Subjected to Reversed Cyclic Loading
Sixteen large-scale reinforced concrete specimens without web reinforcements were tested to study the behavior of typical bridge piers subjected to deflection reversals that were large enough to cause extensive yielding of the longitudinal reinforcement. The different parameters considered included shear spanto-depth ratio, percentage of longitudinal reinforcement, frequency of the applied load...
متن کاملOut-of-plane behaviour of reinforced concrete members with single reinforcement layer subjected to cyclic axial loading: beam-column element simulation
Earthquake loads can induce out-of-plane deformations in thin reinforced concrete (RC) walls that may lead to member out-of-plane failure or cause a premature in-plane collapse. Such instability phenomena have been observed after the recent earthquakes in Chile (2010) and New Zealand (2011). Walls with single layer of vertical reinforcement are more vulnerable to instability issues than the typ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: American Journal of Civil Engineering
سال: 2020
ISSN: 2330-8729
DOI: 10.11648/j.ajce.20200802.11