Finite Element Analysis of Melt Mixing Zone in Twin Screw Extruders with Special Geometries
نویسندگان
چکیده
منابع مشابه
Adaptive finite element simulations of fluid flow in twin-screw extruders
• A submitted manuscript is the author's version of the article upon submission and before peer-review. There can be important differences between the submitted version and the official published version of record. People interested in the research are advised to contact the author for the final version of the publication, or visit the DOI to the publisher's website. • The final author version ...
متن کاملSequential calculation of torque in procedure of twin screw extrusion
The drug making resreach has accentuated on extrusion technology for a long time. The advance of drug bioavailibility, bead manufacturing and granulation is assured by extrusion procedures. There are also diverse effects in resereches with respect to the use of process understanging as a tool in quality management. Many initiatives of FDA such as PAT and QBD are getting accepted. In this survey...
متن کاملOptimization of Co-rotating Twin-Screw Extruders Using Pareto Local Search
A Pareto Local Search (PLS) algorithm was developed and applied to the screw configuration of co-rotating twin-screw extruders. This problem can be seen as a sequencing problem where a set of different screw elements are to be sequentially positioned along the screw in order to maximize the extruder performance. The results obtained were compared with previous results obtained with a Multi-Obje...
متن کاملNon-isothermal Simulation of the Flow in Co-rotating and Counter-rotating Twin-screw Extruders Using Mesh Partitioing Technique
A new algorithm for simulation of non-isothermal flow in a twin-screw extruder is introduced. In the new algorithm, the finite element mesh of tetrahedral elements is created in the complete barrel including the space occupied by the screws. By partitioning the tetrahedral elements which are intersected by the screw surfaces into two tetrahedral, pyramidal or prismatic finite elements, the new ...
متن کاملAnalysis of Roll Wear in Reshaping Using Finite Element Simulation
Reshaping process is a widely used method for producing tubes with non-circular cross sections. Owing to the friction between pipe and rolls, initial round pipe moves forward and consequently, it gradually formed into square or rectangular one. In practice, geometric profile of the rolls will be changed after a while. These changes would be detrimental the production of faultless products. Ther...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Seikei-Kakou
سال: 2006
ISSN: 0915-4027,1883-7417
DOI: 10.4325/seikeikakou.18.819