Finite Element Analysis of Impact Energy on Spur Gear
نویسندگان
چکیده
منابع مشابه
Comparative Finite Element Analysis of Reconstructed New and Worn Tooth of Spur Gear
Spur gear wears either due to rubbing action between the meshed gears or by the occurrence of unwanted elements like dust particles, metal fragments, etc. which reduces its efficiency and service life. It is always a challenging task to determine the remaining life of a component or the strength of a component once wear has occurred on teeth surface. This paper presents an application of revers...
متن کاملAnalysis of a gear train using finite element modelling
Here the theoretical maximum contact stress is calculated by Hertz equation. Also the finite element analysis of spur gear is done to determine the maximum contact stress by ANSYS 14.5. It was found that the results from both Hertz equation and Finite Element Analysis are comparable. From the deformation pattern of steel and grey cast iron, it could be concluded that difference between the maxi...
متن کاملFinite Element Analysis of Low Velocity Impact on Carbon Fibers/Carbon Nanotubes Reinforced Polymer Composites
An effort is made to gain insight on the effect of carbon nanotubes (CNTs) on the impact response of carbon fiber reinforced composites (CFRs) under low velocity impact. Certain amount of CNTs could lead improvements in mechanical properties of composites. In the present investigation, ABAQUS/Explicit finite element code (FEM) is employed to investigate various damages modes of nano composites ...
متن کاملTorque Analysis of Magnetic Spur Gear with Different Configurations
This paper presents design and torque analysis in various types of magnetic gear with different magnetic materials and air gap. This type of gear offer both high speed and high torque required for drive applications. In the proposed gear analysis the low speed side is connected to prime mover and high speed side is connected to load, suitable for wind power, automobile applications and group dr...
متن کاملSpur Gear Tooth Stress Analysis And Stress Reduction
Gears are commonly used for transmitting power. They develop high stress concentration at the root and the point of contact. The repeated stressing on the fillets causes the fatigue failure of gear tooth. The main objective of this study is to add different shaped holes to reduce stress concentration. A finite element model of Spur gear with a segment of three teeth is considered for analysis a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATEC Web of Conferences
سال: 2018
ISSN: 2261-236X
DOI: 10.1051/matecconf/201822506011