Finite element analysis of heat generation in dissimilar alloy ultrasonic welding
نویسندگان
چکیده
منابع مشابه
Finite Element Analysis of Heat Generation in Ultrasonic Thermography
Vibrothermogrphy is a promising technique that uses ultrasonic elastic waves to locally stimulate defects on solids specimens and is typically applied in the aerospace and automotive industries. This technique allows for defect selective imaging using thermal waves that are generated by ultrasound waves. The mechanism involved is frictional heating or hysteresis that turns a dynamically loaded ...
متن کاملFINITE ELEMENT SIMULATION OF HEAT TRANSFER IN FRICTION STIR WELDING OF AL 7050
Friction welding is widely used in various industries. In friction welding, heat is generated by conversion of mechanical energy into thermal energy at the interface the work pieces during pin rotation under pressure. A three-dimensional thermo mechanical simulation of friction stir welding (FSW) processes is carried out for Aluminium Alloys of 6061and 7050 where the simulation results are comp...
متن کاملFinite Element Analysis of Crack Welding Process
The numerical simulation of the crack welding process is reported in this paper. The thermo-electro-structural coupled-field finite element analysis is adopted to investigate the welding process of crack surfaces. In the simulation, the pressure-dependent and temperature-dependent electrical contact conditions are considered. From the results, the crack surfaces can melt and weld together under...
متن کاملFinite Element Analysis of a Welding Transformer
The study introduces the detailed sequence of operations necessary to determine the selfand mutual inductances of power transformers from numerically simulated open-circuit and bucking experiments. Parameters of a welding style transformer are compared to those of a normal step-down transformer of equivalent ratings. The investigation identifies the different patterns of magnetic flux circulati...
متن کاملFinite Element Simulation of Welding Distortion in Large Structure
Fusion welding is widely used in heavy industries to join different parts together. But sometimes welding-induced distortions cause problems like misalignment during assembling and make costs to remove them. Thus it is imperative to predict and mitigate them to improve weldments quality and also reduce in fabrication costs. This study at first will introduce inherent deformation method for pred...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials & Design
سال: 2018
ISSN: 0264-1275
DOI: 10.1016/j.matdes.2018.07.041