Finite element analysis of footings on layered soils
نویسندگان
چکیده
منابع مشابه
three-dimensional analysis of bearing capacity of square footings on convex slopes by finite element method
soil slopes are sometimes curved in plan rather than being straight. this curvature,especially when it is convex, decreases the bearing capacity of the slope. finite element methodhas been used here in this research to investigate the reducing effect of curvature on bearingcapacity of a slope. failure of soil has been assumed to be according to mohr-coulomb criteria;but the flow rule of the soi...
متن کاملFinite element comparison of single, bi-layered and three-layered tube hydroforming processes
In this paper, single, bi-layered and three-layered tube hydroforming processes were numerically simulated using the finite element method. It was found that the final bulges heights resulted from the models were in good agreement with the experimental results. Three types of modeling were kept with the same geometry, tube material and process parameters to be compared between the obtained hydr...
متن کامل3d bearing capacity analysis of shallow foundations on layered soils using discrete element method
distinct target of this paper is development of 'implicit discrete element method (dem)' in three dimensions for estimating the ultimate bearing capacity of shallow foundations on layered (non-homogeneous) soils consisting of sand overlying sand or clay overlying sand and vice versa with different shear resisting parameters. in this method, shear resisting parameters and density of ea...
متن کاملFinite Element Analysis of Large Strains in Soils
FINITE ELEMENT ANALYSIS OF LARGE STRAINS IN SOILS by RODRIGO MOLINA FERNANDEZ Submitted to the Department of Civil Engineering on August 30, 1971, in partial fulfillment of the requirements for the degree of Master of Science in Civil Engineering. Some problems of behavior of soils under given boundary conditions involve large deformations and strains, but finite element analyses of soil proble...
متن کاملmulti layered finite element analysis of graded coatings in frictional rolling contact
a plain strain analysis of frictional rolling contact on an elastic graded coating is presented in this paper. finite element method is applied to gain an understanding of the stresses and contact zone properties caused during rolling contact. the effects of friction, material stiffness ratio and coating thickness on stresses in contact zone and coating/substrate interface are studied. shear mo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Mathematical Modelling
سال: 1987
ISSN: 0270-0255
DOI: 10.1016/0270-0255(87)90501-x