Finite Element Analysis of Cold Formed Steel Purlin Bolted Connections
نویسندگان
چکیده
منابع مشابه
Finite Element Analysis on Tensile Stiffness of Cold-Formed Steel Bolted Connections
This paper presents a finite element analysis on the tensile stiffness of steel bolted connections, which are fabricated from thin-walled cold-formed steel strips and members. This type of bolted connection is usually used to assemble the diagonal bracing member in the light steel structure. Unlike the architectural steel structure, thin walled steel bolted connection cannot be simplified into ...
متن کاملStructural behavior of cold-formed stainless steel bolted connections
This paper presents a series of tests on cold-formed stainless steel bolted connections. The test specimens were fabricated from three different types of stainless steel, including austenitic stainless steel EN1.4301 (AISI 304) and EN1.4571 (AISI 316Ti having small amount of titanium) as well as lean duplex stainless steel EN1.4162 (AISI S32101). The material properties of the three types of st...
متن کاملReview on Cold-Formed Steel Connections
The concept of cold-formed light steel framing construction has been widespread after understanding its structural characteristics with massive research works over the years. Connection serves as one of the important elements for light steel framing in order to achieve its structural stability. Compared to hot-rolled steel sections, cold-formed steel connections perform dissimilarity due to the...
متن کاملCyclic Behavior of Cold-Formed Steel Stud-to-Sheathing Connections
This series of experiments aims to characterize the cyclic behavior of cold-formed steel (CFS) stud-to-sheathing connections. This connection provides the key energy dissipating behavior in wood sheathed CFS shear walls, and provides bracing to the studs under gravity and out-of-plane loads. A simple testing rig is developed consisting of two CFS lipped channels facing toe-to-toe connected on t...
متن کاملNumerical Analysis of Cyclic Behavior of Beam-To-Column Bolted Connections in Steel Frames
This article considers the seismic behavior of beam-to-column joints in steel frames for different bolt arrangements by using of finite element modeling. As the most important beam-to-column joint type, the beam-to-column joints with end-plate is chosen for the analysis. Four different specimens have been analyzed. These models had some differences such as bolt arrangement and the presence or a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IARJSET
سال: 2017
ISSN: 2393-8021
DOI: 10.17148/iarjset.2017.4405