Finite Element Analysis of Bulge Forming of Laser Welding Dimple Jacket
نویسندگان
چکیده
منابع مشابه
Finite element simulation of laser spot welding
The present work reports on a two-dimensional axisymmetric nite element analysis of heat ow during laser spot welding, taking into account the temperature dependence of the physical properties and latent heat of transformations. An analysis based on conduction heat transfer alone, but using the ‘double ellipsoidal’ representation of the laser beam, seems to be suf cient to estimate the tra...
متن کاملFinite Element Analysis of Crack Welding Process
The numerical simulation of the crack welding process is reported in this paper. The thermo-electro-structural coupled-field finite element analysis is adopted to investigate the welding process of crack surfaces. In the simulation, the pressure-dependent and temperature-dependent electrical contact conditions are considered. From the results, the crack surfaces can melt and weld together under...
متن کاملFinite Element Analysis of a Welding Transformer
The study introduces the detailed sequence of operations necessary to determine the selfand mutual inductances of power transformers from numerically simulated open-circuit and bucking experiments. Parameters of a welding style transformer are compared to those of a normal step-down transformer of equivalent ratings. The investigation identifies the different patterns of magnetic flux circulati...
متن کاملSimulation of effective parameters on low-carbon steel laser welding process using finite element method
In this paper, laser beam welding of a rectangular piece of steel was simulated using Fluent software. Physical properties of analytical field was constant and its changes with temperature was ignored. In the present work, effect of tool speed and laser power on temperature distribution of workpiece surface and different deeps in the plane of symmetry and also maximum of temperature and depth o...
متن کاملSimulation of effective parameters on low-carbon steel laser welding process using finite element method
In this paper, laser beam welding of a rectangular piece of steel was simulated using Fluent software. Physical properties of analytical field was constant and its changes with temperature was ignored. In the present work, effect of tool speed and laser power on temperature distribution of workpiece surface and different deeps in the plane of symmetry and also maximum of temperature and depth o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Science
سال: 2015
ISSN: 2029-7289,1392-1320
DOI: 10.5755/j01.ms.21.4.9704