FINITE ELEMENT ANALYSIS OF A SUPERPLASTIC FORMING PROCESS, USING ANSYS SOFTWARE
نویسندگان
چکیده
منابع مشابه
Finite Element Simulation of Superplastic Forming Using a Microstructure Based Constitutive Model
In this paper, Finite Element simulations using ABAQUS are carried out to optimize and simulate the superplastic forming of Ti-6Al-4V sheet at 900 °C. Microstructure-based constitutive models describing the superplastic deformation are implemented in the FE code through user defined subroutines. Two different forming schemes are used; constant strain rate scheme and optimum variable strain rate...
متن کاملFailure Prediction during uniaxial Superplastic Tension using Finite Element Method
Superplastic materials show a very high ductility. This is due to both peculiar process conditions and material intrinsic characteristics. However, a number of superplastic materials are subjected to cavitation during superplastic deformation. Evidently, extensive cavitation imposes significant limitations on their commercial application. The deformation and failure of superplastic sheet metals...
متن کاملSimulation of Process-Stress Induced Warpage of Silicon Wafers Using ANSYS Finite Element Analysis
Wafers warp. It is important to minimize warpage in order to achieve optimal die yield and potentially prevent future device failure. Although the word warpage is widely used in the literature to represent wafer bow (convex or concave shape), in the real world wafers are often seen into warp into saddle shapes. This complicates the characterization of both the sources of and solutions to warpag...
متن کاملFinite Element Analysis of Micro – Electro – Mechanical Systems by using the ANSYS software
Microelectromechanical Systems (MEMS) is the technology of the very small, and merges at the nano-scale into "Nanoelectromechanical" Systems (NEMS) and Nanotechnology. MEMS are also referred to as micro machines, or Micro Systems Technology (MST). MEMS are separate and distinct from the hypothetical vision of Molecular nanotechnology or Molecular Electronics. MEMS generally range in size from a...
متن کاملFinite Element Analysis Of Disc Brake By ANSYS Workbench
The brakes must be strong enough to stop the vehicle within a minimum distance in an emergency. The driver must have proper control over the vehicle during emergency braking and vehicle must not skid. The brakes must have good antedate characteristics their effectiveness should not decrease with prolonged application and thus it demand that the cooling of the brakes should be very efficient. Fo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ANNALS OF THE ORADEA UNIVERSITY. Fascicle of Management and Technological Engineering.
سال: 2013
ISSN: 1583-0691
DOI: 10.15660/auofmte.2013-3.2949