Finite Element Analysis for Microscopic Damage in Single-Fiber Composites Using a Cohesive Zone Model
نویسندگان
چکیده
منابع مشابه
Separation Force Analysis based on Cohesive Delamination Model for Bottom-up Stereolithography Using Finite Element Analysis
Bottom-up (constrain-surface) Additive Manufacturing (AM) systems have been widely used in industry. Compared to traditional open-surface AM technology, properties like better vertical resolution, higher material filling rate, less production time, and less material waste make bottom-up AM technology a suitable candidate for fabrication of complex three dimensional materials with high accuracy....
متن کاملA NEW APPROACH BASED ON FINITE ELEMENT MODEL UPDATING FOR STRUCTURAL DAMAGE IDENTIFICATION
In this study, the finite element model updating was simulated by reducing the stiffness of the members. Due to lack of access to the experimental results, the data obtained from an analytical model were used in the proposed structural damage scenarios. The updating parameters for the studied structures were defined as a reduction coefficient applied to the stiffness of the members. Parameter v...
متن کاملMultiscale Model for Progressive Damage and Failure of Laminated Composites Using an Explicit Finite Element Method
Initial development of a multiscale progressive damage and failure analysis tool for laminated composite structures is presented. The method models microdamage at the lamina level with the thermodynamically based Schapery Theory. Transverse cracking and ber breakage, considered failure mechanisms in this work, are modeled with failure criteria evaluate at the micro-constituent level using the G...
متن کاملA cohesive finite element for quasi-continua
In this paper, a cohesive finite element method (FEM) is proposed for a quasi-continuum (QC), i.e. a continuum model that utilizes the information of underlying atomistic microstructures. Most cohesive laws used in conventional cohesive FEMs are based on either empirical or idealized constitutive models that do not accurately reflect the actual lattice structures. The cohesive quasi-continuum f...
متن کاملCohesive modeling of dewetting in particulate composites: micromechanics vs. multiscale finite element analysis
The effect of damage due to particle debonding on the constitutive response of highly filled composites is investigated using two multiscale homogenization schemes: one based on a closed-form micromechanics solution, and the other on the finite element implementation of the mathematical theory of homogenization. In both cases, the particle debonding process is modeled using a bilinear cohesive ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society for Composite Materials
سال: 2007
ISSN: 0385-2563
DOI: 10.6089/jscm.33.170