Finite Element Analysis (FEA) of blade weed design using Ansys workbench

Finite Element Analysis Of Disc Brake By ANSYS Workbench

The brakes must be strong enough to stop the vehicle within a minimum distance in an emergency. The driver must have proper control over the vehicle during emergency braking and vehicle must not skid. The brakes must have good antedate characteristics their effectiveness should not decrease with prolonged application and thus it demand that the cooling of the brakes should be very efficient. Fo...

ANSYS Workbench User's Guide

Parametric study on Nonlinear Finite Element Analysis on flexural behaviour of RC beams using ANSYS

Nonlinear behaviour of RC beams is complex due to involvement of various parameters. Many attempts have been made by the past researchers to predict the behaviour using ANSYS. The accuracy and convergence of the solution depends on factors such as mesh density, constitutive properties of concrete, convergence criteria and tolerance values etc., Past researchers have used various values of the a...

Simulation of Process-Stress Induced Warpage of Silicon Wafers Using ANSYS Finite Element Analysis

Wafers warp. It is important to minimize warpage in order to achieve optimal die yield and potentially prevent future device failure. Although the word warpage is widely used in the literature to represent wafer bow (convex or concave shape), in the real world wafers are often seen into warp into saddle shapes. This complicates the characterization of both the sources of and solutions to warpag...

Finite Element Analysis of Micro – Electro – Mechanical Systems by using the ANSYS software

Microelectromechanical Systems (MEMS) is the technology of the very small, and merges at the nano-scale into "Nanoelectromechanical" Systems (NEMS) and Nanotechnology. MEMS are also referred to as micro machines, or Micro Systems Technology (MST). MEMS are separate and distinct from the hypothetical vision of Molecular nanotechnology or Molecular Electronics. MEMS generally range in size from a...