Finite Element Analysis and Experimental Study on Elbow Vibration Transmission Characteristics
نویسندگان
چکیده
منابع مشابه
Finite Element Analysis and Experimental Investigation on the Conventional and Vibration Assisted Drilling
In this research, finite element analysis of the conventional drilling and vibration assisted drilling is carried out. The ABAQUS software is employed for FE analysis. The Johnson-Cook models for both plastic deformation and damage are employed for FE simulation.The results of the FE analysis are then verified with experimental results in both conventional and vibration assisted drilling on Al ...
متن کاملFinite Element Analysis and Experimental Investigation on the Conventional and Vibration Assisted Drilling
In this research, finite element analysis of the conventional drilling and vibration assisted drilling is carried out. The ABAQUS software is employed for FE analysis. The Johnson-Cook models for both plastic deformation and damage are employed for FE simulation.The results of the FE analysis are then verified with experimental results in both conventional and vibration assisted drilling on Al ...
متن کاملSimulation and Experimental Study of Vibration and Noise of Pure Electric Bus Transmission based on Finite Element and Boundary Element Methods
Since the electric motor of pure electric vehicle replaced the engine, the "masking effect" disappears, and the problem of vibration and noise of the transmission becomes prominent. This is generated during the gear meshing and is transmitted to the housing through the shaft and bearing. Thereby, radiation noise of the housing are generated. The prediction and analysis...
متن کاملinvestigation of apple vibration characteristics using finite element modal analysis
the most important quality indicator of fruits is the flesh firmness which is well correlated to their young’s modulus. in this research variation of vibration characteristics (shape modes, natural frequency) of apple due to change of material characteristics (density, young's models, poisson ratio) and apple volume was investigated using finite element simulation. an image processing technique...
متن کاملExperimental and Finite Element Studies on Free Vibration of Automotive Steering Knuckle
The main aim of this research is to determine the best material for manufacturing of steering knuckle in order to reduce the weight using aluminum alloy and Metal Matrix Composite (MMC). To achieve this purpose, the Modal test has been performed to study vibrational behavior of steering knuckle. CAD Model has been prepared by using coordinate measuring machine (CMM). Finally, the Finite Element...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2017
ISSN: 1757-8981,1757-899X
DOI: 10.1088/1757-899x/269/1/012032